Ads by Google
Cantilever CNC Cutting Machine
This type of cutting machine for small cantilever structure, horizontal cutting width 1.4m, vertical cutting length 1.5m, 2m, 2.5m, 3m, 3.5m and other specifications, is between LHBX-1 Portable CNC cutting machine and LHXB -2 Cantilever CNC Cutting Machine cutting machine between the two kind of models, both LHBX-1 type and LHXB-2-type cutting machine merit, can be placed directly into the plate, but also can be placed on the side of the plate cutting.
The CNC cutting machine for the cantilever structure, horizontal cutting width 2m, each section longitudinal rails 3m (can be infinitely extended); can configure multiple cutting torch, the user can type matching capacitor or automatic arc voltage increase; cut Actions at the top with fine-tuning of the digital control panel, operation is extremely convenient; LHXB-2 CNC cutting machine for the small overall mobile, not fixed occupancy plant, easy to use and flexible.
Parameters
| Cross Beam Length | 2200mm |
| Longitudinal Rail Length | 3000mm |
| Effective Cutting Width (X axis) | 1800mm |
| Effective Cutting Length (Y axis) | 2000mm |
| Cutting Mode | Flame only; Plasma only |
| Drive Mode | Single-side |
| Flame Cutting Thickness | 6-150mm |
| Plasma Cutting Thickness | According to the plasma power |
| Cutting Speed | 0-3500mm/min |
| Moving Precision | 0.01mm/step |
| Power Source | 220V 50Hz 1000W |
| Cutting Gas | Acetylene, Propane and oxygen |
| Plasma Gas | Pressed air, Oxygen, N2 |
| Torch Height Controller | Electromotion bottom |
Cutting sample