Products Information
DZH-2 Automatic pocket-spring production line is professional equipment for producing pocket spring units. This Automatic mattress machine consists of the pocket spring machine, spring assembling machine . Firstly, the pocket spring rows are produced by the Automatic pocket spring machine, and then transferred to the gluing system by the connection system. After this, the glue is extruded onto the spring rows and/or top and bottom non-woven fabric to make them a unit. When a unit is finished, the Automatic mattress machine will automatically cut the up and down non-woven fabric if used.DZH-2 pocket spring machine finishes the whole production process from wire to whole spring unit, and it's fully automatic and labor saving. Further, it's of safety and high capacity. This pocket spring machine bears the features below: compact design, easy operation,high capacity and cost saving.It's an ideal Automatic mattress machine for spring units production.
Main Technical Parameters: | |
Capacity | 62 Pcs/min |
Overall Dimension pocket spring machine | 2390×1680×1730mm(excluding the fabric or wire shifts) |
Overall Dimension For Assembler | 3720×3300×1800mm |
Power Supply | 3-Phase, 380V, 50Hz |
Air Pressure | (0.8-1.2)Mpa |
Air Consumption | >2.2m3/min |
Total Power | 37.71KW |
Pocket Spring Machine Power | 30KW |
Pocket Spring Assembler Power | 7.71KW |
Spring Height Before Pocketed | (160-250)mm |
Spring Height After Pocketed | (120-210)mm |
Wire Diameter | (Φ1.8-Φ2.3)mm |
End-Coil Diameter | (Φ52-Φ70)mm |
Mid-Coil Diameter | (Φ55-Φ70)mm |
Non-Woven Fabric Width For Pocketing | (400-520)mm |
Non-Woven Fabric Thickness | ≥70g/m² |
Gluing Unit Width | ≤2100mm |
Non-Woven Fabric Width For Assembling | (700-2100)mm |
Outer Diameter Of Non-Woven Fabric Reel For Assembling | ≤1000mm, height≤150Kg |
Automatic Transfer Pocket Spring Production Line Machine Sets