Cam clutch cage FDC series sprag cage is as same as Stieber DC series sprag cage, but torque is more higher.noise is lower.

     1. Cam clutch cage clutch part(clutch core) FDC series is a sprag type freewheel cage without inner or outer races. Its model and construction is followed for, this type provides higher torque and lower noise while fixed convenient.

     2. It must be installed in a design providing races, bearing support for axial and radial loads, lubrication and sealing.

     3. The sprag space tolerance must not be exceeded. Inner and outer races must both have a minimum plain widthe, without any recess, to ensure the freewheel functions correctly as shown on following pages.

     4. We can offer standard inner and outer races, as shown on the following pages.

     5. Alternatively, races can be made in case hardened steel shafts, or housings, to the specification below.

     6. Surface hardness of the finished pargt should be HRC 60 to 62°, for a depth of 0.6mm minimum.

     7.Core hardness to be HRC 35 to 45°. Surface roughness not to exceed 22CLA . Maximum taper between races:0.007mm for 25mm Width.

Type modele	Overrunning speeds			Sprag space								Weight
	TKN1) (Nm)	nmax2) (min-1)	nmax3) (min-1)	a (mm)	c (mm)	(mm)	emin (mm)	dmin (mm)	bmax (mm)			(kg)
FDC2222G	50	8,600	4,300	22,225	38,885	8.33	10.0	50	17	-	12	0.030
FDC2776	95	6,900	3,400	27,762	44,422	8.33	13.5	58	21	-	14	0.055
FDC3034	99	6,300	3,100	30,340	47,000	8.33	13.5	62	23	-	14	0.060
FDC3175(3C)	127	6,000	3,000	31,750	48,410	8.33	13.5	63	24	3	16	0.060
FDC3809A	220	5,000	2,500	38,092	54,752	8.33	16.0	71	29	-	18	0.085
FDC4127(3C)	179	4,600	2,300	41,275	57,935	8.33	13.5	75	32	3	18	0.090
FDC4445A	290	4,300	2,100	44,450	61,110	8.33	16.0	79	34	-	20	0.095
FDC4972(4C)	245	3,800	1,900	49,721	66,381	8.33	13.5	86	38	4	22	0.100
FDC5476A	420	3,500	1,700	54,765	71,425	8.33	16.0	92	42	-	24	0.110
FDC5476A(4C)	420	3,500	1,700	54,765	71,425	8.33	16.0	92	42	4	24	0.130

cam clutch cage