1. wind power sensor 2.material:aluminum alloy material 3.performance good seal,waterproof, corrosion resistant function.

FC8350 series wind speed sensor used to detection level for wind speed, the wind cup begin to spin after the wind blows, through the electromagnetic induction resulting voltage, frequency, current signal output. Measured value and level of wind speed of a linear relationship between.

The external all parts of sensor completed by aluminum alloy material, and in plastic-sprayed surface, this kind of plastic is a waterproof, corrosion resistant function, internal and turn place all with the sealing performance good seal, prevent water, salt fog and  the dust. In order to be able to use in the cold, and the rain and snow climate conditions , FC8350 series wind speed sensor are installed internal electronic automatic heating system, prevent freeze for the rolling bearing and external rotating parts , when the temperature dropped to below zero, the system will automatically heating, melted the snow.

Installation: the sensors installed in installing special stents or stem, use PG21 screw holes or φ 29 hole for installation, guide the connecting cable or plug through installing hole, with PG21 screw nuts fixed. A pyramid sensor by two airfoil bolt in special φ 50 of the mast use.

FC8350 series wind speed sensors selection wizard

Wind speed sensor type      signal output         measurement range      heating power       connection wires

FC8350 -M-0175                     1......75HZ                0.5...50m/s                          20W          12m x6 x 0, 25 mm ²

FC8350-A-0020                        0......20 mA             0.5... 50 m/s                       20 W           12 m x 6 x 0, 25 mm ²

FC8350-A-0420                        4...... 20 mA            0.5... 50 m/s                        20 W           12 m x 6 x 0, 25 mm ²

FC8350-V-0010                        0...... 10 V               0.5... 50 m/s                         20 W            12 m x 6 x 0, 25 mm ²

FC8350-V-0005                        0...... 5 V                 0.5... 50 m/s                         20 W              2 m x 6 x 0, 25 mm ²

 FC8350 series wind speed sensor technology parameters

project:                               parameters

Measurement range:     0.5  to 50m/s

Resolution:                      0.1m/s

Precision:                      +/- 3%

Measuring principle:   Electromagnetic principle

Output current load:    Ω 500 max.

Working voltage:          12 ~ 36 V (DC24V)

Heater:                         24 V DC,  >20 W

Survival wind speed: 70 m/s(max.), 30 min

Connection mode :   12 m LiYCY6 x 0.25mm2  the cable

weight:               0.95 kg ~ 1.35 kg