CZQ-4000 Three-phase full-wave ac/dc fluorescent magnetic powder flaw detection machine for small and medium-sized parts A,Equipment Name, Model, Brand and Manufacturer

1,Name Three-phase full-wave ac/dc fluorescent magnetic powder flaw detection machine

2,Model CZQ-4000

B,Design standard & basis

1,Equipment design and manufacturing standards: the national standard GB3721-83 "magnetic powder flaw detection machine.

2,This equipment should meet all the magnetic particle inspection technical requirements in Standard JB/T8290-1998.

C,Inspection areas

Can meet the 300mm in diameter less than, length is 2540 mm of small and medium-sized parts within surface and near surface there may be slight defects.

D, Design requirements2,Main mechanical design requirements

2.1 Mechanical main body frame is made of high quality steel, and it is tough and firm..

  4,Magnetization power control system

Longitudinal and circular magnetization currents are supplied independently with the help of two separated transformers. Solid-state relay controlled and Phase shifting trigger circuit stepless.

5,Electric control system6,Spraying, agitation, filtration and recycling system of magnetizing suspending liquid7,Longitudinal magnetization coil

7.1,A mobile magnetized coil,inner diameter 400mm.

8,The human-machine interface control system 

   11,Automatic demagnetization system

Attenuation type automatic demagnetization.

12,Equipment has to be automatic alarm function

When the main transformer temperature rise more than design standard, or when magnetizing current flow, owe flow appeared when automatic alarm equipment.

13,With the phase control power function

For residual magnetism method detection.

14,High integration the periphery of the circuit

For Solid-state relay controlled for phase control,promise DiaoLiu,with non-contact, no interference, no noise, operation simple, reliable performance, etc.

E,Equipment main specifications

1,Power supply  3 phase, 50Hz, 380V±10%, 60KW  or as per customer's requirements

2,magnetizing current current can be set in advance,Digital display, magnetization time can timely set.

3,Circular magnetizing current  AC, 0 --- 4000A, RMS three-phase full-wave ac,Timely set

DC, 0 --- 4000A, RMS three-phase full-wave dc,Timely set

4,Longitudinal magnetizing current  AC, 0--20000AT, RMS three-phase full-wave ac,Timely set

DC, 0--20000AT, RMS three-phase full-wave dc,Timely set

5,Circular and longitudinal can switch

6,Sensitivity

6.1,Sensitivity:Clear indications on test piece Model A #2.

6.2,Dc sensitivity JB/T6066 according to regulations,adopts B shape standard test blocks,set 3400 A dc current,Try piece of six holes show clear(10.67 mm away from the surface)

7,Demagnetization way Ultralow frequency demagnetization

8,Demagnetization effect ≤160A/m(0.2mT

9,Working way: automatic and manual

10,Part length capacity 0-3000 mm

11,Magnetic coil inner diameter 400mm.

magnetic particle inspection machine