Used for saling cable as per the client requiring cable length, from pay off rewind the fixed cable length to take up.

A.Purpose:

    The machine is used for the rewinding of cable.

B.Scope of equipment

1, TF-800/2000 Column type pay off with motor driven(Heavy duty) 1 set

2,  # word guide cable stand                                  1 set

3, Meter counter                                          1 set

4, TQD-500 kg Belt caterpillar                                  1 set

5, TP-800/1600 column type take up&traversing stand         1 set

6. Electrical control                               1 set

C. Every machine configuration

1, TF-800/2000 column type pay off stand with motor driven(Heavy duty)

1.1,  Pay off way: the pintle adapter is no driven type , left column and right column can release and clamp at synchronizing or separately , also left and right pintle adapter can up and down at synchronizing or separately.

12,   # Word cable guide stand

    Uses the 2 set of vertical rollers and 2 set of horizontal rollers, can adjust the distance of rollers groups as per the cable diameter, the surface of rollers is chroming.

3,  Meter counter

3.1, Circumference of meter wheel                        500mm

3.2, Max meter Volume                               9999m

3.3, The accuracy error                                ≤3‰      

3.4, The form of wheel is double type, horizontal installation; there is buffer spring on the pressuring situation, has the guide cable roller in the input and output of cable.

4, TQD-500kg belt caterpillar

4.1,max pulling force                         500kg

4.2 Suitable cable outside diameter           5~40mm

4.3,(Max pulling speed as per cable diameter)   80m/min

4.4,(Touching length of belt)                  750mm

4.5 Motor power                           AC-7.5kw Siemens VF motor

4.6,Control way                                   Siemens G120 controller

4.7 Pairs of No. of clylinder                     3pairs

4.8, Center height                             1000mm

4.9,Pneumatic compacting

4.10, with a meter counter to display the length

4.11,   There are # guide roller on the position of input and output of cable , and the distance of roller group can be adjusted. 

5, TP-800/1600 column type takeup&traversing

5.1, Main technical data

5.1   Take up way: left column and right column can release and clamp at synchronizing or separately , also left and right pintle adapter can up and down at synchronizing or separately. 

D Electrical control  

   The whole machine is controlled by Siemens PLC , the touch screen is siemens TP177-5.7 inch, the human-machine interface, the start is very steady and performance is reliable .

   The control cabinet is platform type.

   The belt caterpillar is siemens controller , and the control way of tension of take up is torque .

2000 rewind line