Ads by Google
Introduction of cnc water jet cutting machine:
CNC waterjet cutting machine is composed with CNC cutting table HP system CAD/CAM software system cutting head Hp water valve and sand controlling system. Also you can choose auto abrasive feeding system, water softening system and cooling system according to requests.
work table can be customed as to your detail request.
high presusre pump:300mpa,380mpa,420mpa
controller :servo motor driver ,Nc studio.cutting software ,run base on windows Xp.
The advantages of cnc water jet cutting machine:
ü Can be transfer the drawings to cutting quickly
ü Quick position: some or few fixing quipments
ü High accuracy: reduce the recutting
ü Quicker cutting speed
ü In no need of fabrication for the working parts
ü Safer for the operator and circumstance: no steam, dust, smog, etc
ü Cool cutting: no heat will be produced
ü Clear processing: in no need of clear the working parts again
ü Good cutting finishes: in no need of rework the cutting finishes again.
ü Narrow cutting gap
ü Quick calibration and easier versatility way of cutting. It has been proved that it can be used in mass production in the ideal system
ü Fit for CAD/CAM software
ü Waterjet cutting machine can cut almost all the materials.It can cut the foilat the thickness of 200mm
| CNC Water Jet Cutting Table: | ||||||
Model(can be customed) | YC-L2015 | YC-L3020 | YC-L4030 | YC-X1520 | YC-X1830 | |
| Machine type (L:bridge,X:fly arm) | Bridge | Bridge | Bridge | Fly arm | Fly arm | |
| Efficient cutting area(mm) | 2000*1500 | 3000*2000 | 4000*3000 | 1500*2000 | 1800*3000 | |
| Axis travel(mm) | X axis | 2000 | 3000 | 4000 | 1500 | 1800 |
| Y axis | 1500 | 2000 | 3000 | 2000 | 3000 | |
| Z axis | 150 | 150 | 150 | 150 | 150 | |
| CNC control system | Ac Servo motor | |||||
| Accuracy | Cutting accuracy | +/- 0.1mm | ||||
| Repeat accurary | +/- 0.05mm | |||||
| Processing speed | 0-15m/min | |||||
| Power supply | 240V/380V/415VAC,3ph,50Hz/60Hz(can be customed) | |||||
CNC Water Jet Higeh Pressure System :
| YCWJ series: | ||||
| Parameter Model | Max.pressure(Mpa) | Max.flowrate(L/min) | Power(Kw/HP) (customized) | Intensifier parts |
| YCG-2230 | 300 | 3.1 | 22/30 | some key parts adopt imported parts |
| YCG-3038 | 380 | 3.7 | 30/40 | whole intensifier imported from Accustream (USA) or KMT (H2O USA) |
| YCG-3742 | 420 | 3.7 | 37/50 | |
KMT series:
Uhp pump system has the following advantage
l It can work 24 hours without break
l The working pressure of the reinforced pump can reach 4136 bar
l The designation of the new end bell seal will reduce the damage of the spare parts
Cutting speed data:
Condition:0.25mm Ruby,0.76mm Nozzle
Materials | Thickness mm | Cutting Speed 300MPA mm/min | Cutting Speed 380MPA mm/min | Cutting Speed 420MPA mm/min |
Marble | 20 | 300 | 400 | 480 |
30 | 200 | 300 | 360 | |
Granite | 20 | 250 | 320 | 384 |
30 | 150 | 200 | 240 | |
Vitrified tiles | 10 | 500 | 800 | 960 |
28 | 100 | 300 | 360 | |
Glass | 8 | 1200 | 1500 | 1800 |
10 | 600 | 800 | 960 | |
18 | 360 | 500 | 600 | |
Laminated glass | 21 | 400 | 600 | 720 |
Sponge | 20 | 5000 | 7000 | 8400 |
50 | 2000 | 3000 | 3600 | |
80 | 1500 | 2000 | 2400 | |
Carpet | 3-4 | 3000 | 3600 | |
Stainless steel pane | 1 | 850 | 1200 | 1440 |
3 | 400 | 600 | 720 | |
6 | 220 | 300 | 360 | |
10 | 150 | 200 | 240 | |
16 | 60 | 100 | 120 | |
20 | 60 | 85 | 102 | |
30 | 20 | 40 | 48 | |
55 | 10 | 12 | ||
65 | 5 | 6 | ||
Aluminum panel | 10 | 200 | 400 | 480 |
20 | 80 | 150 | 180 | |
30 | 60 | 100 | 120 | |
70 | 40 | 48 |
The above data just for reference.
CNC water jet cutting machine