1.Smart Phone Wifi LED RGB Controller 2.Smart Phone Wifi RGB Controller 3.Smart Phone Wifi RGB LED Controller

Technical Data

1. Working Voltage: DC7.5-24V

2. Output channel: Can be used 3/2/1 channel

3. Output current: 4A*3

4. Connecting method: Common anode

5. Dimension: L105.5*W45*H23mm

6. Remote distance: 50 meters indoor, 100 meters outdoor

7. Software: Android system (at least version 2.3 with WIFI function) or IOS system, 

Language : English/Chinese. 

8. Receiver sensitivity: 802.11b DSSS(-5dBm),802.11b CCK (-10dBm),

802.11g OFDM(-15dBm)

 

RGB Vision

 

                         

 

How to use

 

1)     Color ring: Press the color ring, choose any color as your request. The Color state shows your choice.

2)     Brightness bar: On the left, it is the Max. brightness, on the right is the Min. brightness

3)     Run key: Invalid in static color, valid for dynamic modes.

4)     Open: ON/OFF.

5)     20 built-in modes:

 

Press M-/M+ to choose the mode, you can adjust the speed at the same time. Total 31 grades:  "1" is the fastest grade; "31" is the slowest grade. Please the built-in mode form of RGB Control.

 

 

 

 

 20 Built-in modes

 

Number	Mode	Remarks
1	Seven color cross fade	Speed is adjustable. Total 31 grades "1" is the fastest grade; "31" is the slowest grade.
2	Red gradual change
3	Green gradual change
4	Blue gradual change
5	Yellow gradual change
6	Cyan gradual change
7	Purple gradual change
8	White gradual change
9	Red/Green gradual change
10	Red/Blue gradual change
11	Green/Blue gradual change
12	Seven color strobe flash
13	Red strobe flash
14	Green strobe flash
15	Blue strobe flash
16	Yellow strobe flash
17	Cyan strobe flash
18	Purple strobe flash
19	White strobe flash
20	Seven color jumping change