Product Specifications:960×960×100mm,980×980×100mm,Other specifications are by customer detail requirement

Product Packing:According to customer detail requirement

Product Description:

    The product in the filter make a fixed filter head and filter-carrying role. Filter plate fabrication and installation do a direct influence to the filter's normal operation, especially the flatness requirements, if the error is too large, the installation of the filter head can not be on the same level, causes water distribution and gas distribution is uneven, and filter treatment effect when run-time. Backwash when water distribution and gas distribution is uneven, will lead to Recoil uniform degree of inconsistency of the filter layer, resulting in filter local backwash strength too large, and excessive erosion of the filter layer or backwash thoroughly.

    High strength and high-precision BAF filter plate with vertical flat steel mold cast, water-cement ratio, fine aggregate, quartz sand grading science, strict implementation of national standards, according to design requirements in the hole ,embedded ABS plastic casing, with double-layer two-way high-quality twisted steel. High-grade cement, the standard of fine stone and quartz sand by mechanical stirring, tamping and pouring to make .Per square meter of filter plate up and down both sides , the horizontal error of ± 2mm. Filter installed to reach the precision of the whole pool of the level of error ≤ 5mm,and four sides neatly without warping, to ensure the uniformity of the biological aerated filter water distribution, gas distribution.

    The products are two main categories: split assembly plate and the overall placement filter plate.

Split filter plate, standard specifications is 960 × 960 × 100mm and 980 × 980 × 100mm (length × width × height),the filter head standard is (6×3)/m2,(6×6)/m2,(7×7)/m2,(7×8)/m2. Production thickness of 120mm, 150mm filter plate, filter head arrangement of 49 / m2, and the manufacture of other special-shaped size are available upon request.

    The overall filter plate for on-site pouring, molding, thickness up to 150mm, 200mm, etc., per m2 filter head layout based on user needs, 49, 56, 64,etc.

Main Usage:

1,The tap water supply filter;

2,Biological Aerated Filter (BAF).

Filter Plate