Ads by Google
Introduction
The RTC85.XX is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat.The thermostat acquires the actual temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected set point.
Application
For the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Lightindustrial buildings...
Features
LED indicator is light when heating is onWith manual knob for easy operationOptions of built-in sensor or floor sensorOn/off control output for heating device
Technical data |
Voltage: AC230V( AC110V/ AC24V available)Power consumption: 5WSetting range: 5°c~50°c Switching differential: ±1KAmbient temperature: -5°c~50°cProtective housing: IP20Housing material: self-extinguishing PCFloor sensor: rubber-thermoplastic NTC sensor, cable length is 3m |