Ads by Google
Pneumatic Crimping Tool AM-10
The machine is driven by dual-action normal cylinder,which has advantages of high
efficiency and quaulity in crimping force and speed.The machine is fit for crimping
many kinds of terminals.The die sets are interchangeable with our manual crimping
tools.So we can provide you all kinds of die sets for crimping.
Accessories:one die set,one foot air valve,two air pipes.
| Specification | |
| Description | AM-10 |
| Range of Application | non insulated terminal16mm2≤ |
| pre-insulalated terminal 6mm2≤ | |
| cord-end terminal 35mm2≤ | |
| Output force | 13.5KN |
| Applicable air pressure | 0.4-1M pa |
| External Dimension | 260mm×120mm×140mm |
| Weight | 4 KGS |
Instructions
(1)Put the terminal in relevant tool mouth firstly;
(2)Then put the stripped insulated conductor into the terminal,push the foot air valve,loose it
after crimping well.
(3)Cut off gas supply.Dismount the fix bolts on the clamp with the L spanner.
(4)Replace a desired clamp and screw down the bolt again.