Ads by Google
Fiberglass Drywall Joint MeshBacking Polyester Film With Glass Yarn Adhesive Acrylic Solvent Acrylic Emulsion Colors Adhesion To Steel(N/In) 14 20 Tensile Strength(N/In) 490 790 Elongation(%) <12 Total Thickness(mm) 0.100± 10% 0.120± 10%
Instruction:>1. Wall must be clean and dry. >2. Center and apply tape over the length of the joint. Pressing firmly. >3. Apply a generous first coat of compound over the tape. And through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape. >4. Let dry completely. Then sand lightly. >5. Apply sufficient thin finishing coats to product a smooth wall surface. >6. Cut or butted boards do not have a tampered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build up of compound that will require an increased amount of edge feathering.
Fiberglass Drywall Joint Tape