Ads by Google
FS3198-C41-009 Weighing Batching Controller
Introduction
FS3198-C3x,C4x,C5x,C6x controllers have 3~6 weighing and batching channels, the batching system requires no PLC or computer control. These weighing and batching controllers are made by our company which summarize the years experience of electronic weighing scale in developing and applying methods, adopt single chip MCU, low drift differential amplifier, high accuracy A/D, consecutive filter in quasi-stationary dynamic weighing. The feeding channel control is running with automatic tare at first, and channel feeding control by net weight. It amends arriving advance weight when each channel feeds in end, and feeds tinily repeatedly till weight qualified if less than qualified weight. The total weight is displayed till all channels feeding end. The instruments use menus for batching administrator prescription input, work prescription input and advanced control parameters input with password protection. The system control actuators may be tested directly by instrument panel at manual mode. They process unload end control with small weight threshold and time delay. The weighing and batching control may be set up as times mode or continuous mode.
FS3198-C31,C41,C5,C6 use single speed feeding-in control. FS3198-C49 uses double speeds feeding-in control. The FS3198-C41,C49 four channels batching meter has automatic vibrating control when channel feeding-in or scale unloading at running state.
FS3198-C3~C6 weighing and batching controllers are used in batch scale or weighing batch, multichannel with quantitative control on the weighing scale needed no PLC or industrial computer.
The system control actuators may be tested directly by instrument panel at manual mode. Under the manual mode, the automatic control logic is of no effect, and you can use the numeric keys to test the work states of the relay-board’s outputs. This function is convenient for debugging and maintenance of weighing control system.