1.Vector, V/F control 2.Output Frequency Range: 0-300.0 Hz 3.3PH AC 380~ 440V, 50 / 60Hz 4.Customized VFD

Kinco VFD integrates the characteristics of compact design, easy operation, and effective cost, including MV100 Series, EV100 Series, FV100 Series and SV100 Series. The functions such as unique over current, stall and torque protection make Kinco VFD work smoothly and safely.

SV100 Series has two control methods: vector loop and V/F.

Rated Voltage/Frequency: 3PH  AC 380~ 440V, 50 / 60HzControl Method: Vector control and V/F controlOutput Frequency Range: 0~300.0 HzFrequency Accuracy: Digital setting: Max frequency * ±0.01%, Analog setting: Max. frequency * ±0.2%

Parameter of SV100 Series VFD:

Key technology data and function
Input	Rated input voltage(V)	Three-phase, 380V~440V AC;Fluctuation range:-15% ~ +10%; Voltage unbalancedness:<3%, distortion rate satisfies the IEC61800-2 demand
	Rated frequency	50Hz/60Hz; Fluctuation range: ±5%
Output	Frequency	0Hz~300Hz. V/F: maximum 1000Hz (Custom made), others: 650Hz (Custom made)
	Overload capacity	G Type:150% rated  current 1 minute,  180% rated current 10 seconds
	Control method	Vector control without PG,  Vector control with PG,  V/F control
	Speed range	1:200(Vector control without PG), 1:5000(Vector control with PG)
	Speed control accuracy	0.2%(Vector control without PG), 0.02%(Vector control with PG)
	Speed fluctuation	0.3%(Vector control without PG), 0.1%(Vector control with PG)
	Frequency accuracy	Digital setting:Max frequency ×±0.01%;Analog setting: Max. frequency ×±0.2%
	Starting torque	0.5Hz 150%rated torque (Vector control without PG),  0Hz 200% rated torque (Vector control with PG)
	Torque response	<20ms(Vector control without PG), <10ms(Vector control with PG)
	Torque control	Vector control with PG ,  accuracy: 5%
Expansion		Support multi-function expansion
Controlfeatures	Main functions	Instant stop but no stop,  rapid tracking,  Over/under torque detecting,  Torque limit. Multiple speed operation,  Switch among multiple acceleration/deceleration times,Self-adjusting, S curve acceleration/deceleration,  slip difference compensation,  fan operation control, Crawl function,  jump frequency operation,  PID adjustment(sleep function),  MODBUS communication,  Drop control,  Torque control,  Switch between torque control and speed control,  Restart automatically,  Energy saving operation.
	Analog input	Three channels -10V~+10V(one is differential input, other two channels support 4~20m, programmable). Resolution:10 bits
	Analog output	Two channels of 0~+10v or 4~20mA. Resolution:12 bits
	Digital input	Seven programmable terminals
	Digital output	Two channels OC signal outputs(programmable)(24VDC, max:50mA);A pair of programmable normally open/closed contacts
	Communication	Supports MODBUS protocol, RS485
	Keyboard	Five LED display, supports parameter copy function
Protection	Over current protection	Over current,  stalling protection,  never tripping
	Torque protection	Over current,  stalling protection,  never tripping
	Motor protection	Electronic Inverse time limit,  can be connected to the external PTC detecting
	Overload protection	Inverse time limit feature, 150% 2min
	Over current protection	The drive output current is higher than the over current value,  There are acceleration, deceleration and constant speed over current.
	Over voltage protection	The detected value of bus voltage is higher than the over voltage value. There are acceleration,  deceleration and constant speed over voltage.
	Over heat protection	Radiator temperature protection
	Under voltage protection	The detected value of bus voltage or control power supply voltage is under the under voltage value,  the drive gives POFF error
	Stall protection	Acceleration,  deceleration and constant speed  protections can be set separately
	Phase missing protection of input	Detect the phase missing of input power supply
	Phase missing protection of output	Detect the phase missing of inverter output
	Short circuit protection to earth or between two phases	Detect the short circuit to earth or between two phases
	Fault detect of brake unit	Detect the fault of the brake unit
Others	Brake unit	Built- in if power is under 37KW
	DC reactor	optional
	EMI filter	EMI filter, IEC61800-3C1(EN55011CLASSB)10 meters, IEC61800-3C2(EN55011CLASSA)50 meters/100 meters
	Ambient temperature	0°C~+40°C, when temperature is higher than 40°C,  the rated value should be reduced
	Humidity	5%~95%
Protection class		IP20
Installation method		Power under 90kw supports through installation
Bus connector		Supports RS485, CAN

Kinco SV100 Series VFD