1.Integrated I/O module 2.Temperature Range -20~70 degree celsius 3.CE&FCC Certification,IEC III rank 4.Customizable, OEM&ODM

Introduction

1.Specification

   8 Channel Analog Input

   2 Channel Analog Output   4 One Form A Relay output   8 photo-coupler isolated digit input with SOE and Counter   1 Isolated RS485  and 1 RS232( 3 wire)    Modbus RTU

2.Parameters

  

   Analog input

   8 Channel Analog Input   0~5v or 0~20mA (use jumper to select)   Input resistance 0~5v 170kΩ  0~20mA  250Ω   12bit  A/D   0.2% FS ± 2digit

 

   Analog output

   2 Channel Analog Output   0~10v or 0~20mA (use jumper to select)   0~10v  Output resistance  250Ω

   0~20mA  Output resistance 100KΩ Max Load 300Ω   12bit  D/A   0.2% FS ± 2digit

   Digit Input   8 Channel Digit Input   Photo-coupler Isolated    Dry contacts     Commons:  all Negative   DC 12v~48V Input Voltage

   20kΩ  Input resistance

   SOE with 1ms resolving

   Pulse Counter with 32Bit

   1KHz  Maximum Counter Frequency

    Relay Output

    4 Channel relay output    One Form A  (SPST)

    250V/5A   AC   Contact Capacity    Relay Contacts Directly connect to IO terminals

    Communication

    2, RS485 or RS232( 3 wire) , Modbus RTU

    Modbus RTU

    Max baud rate 38400bps

    Address Setting: DIP SW 1~63

3.Operation Condition

   Operating temperature -20°C~ 70°C

   Storage   temperature  -40~85°C

   Operating humidity <85% RH(20±5°C)

   atmospheric 86~108Kpa, No corrosive gas or heavy dust

   Weight   450g

   Input/Output M3 screw terminals

   Mounting: Surface or DIN rail

   Size  125×110×40 mm

   Power Supply   AC 85~265V 40HZ~65HZ or DC 24 v OR DC12V

   Power Consumption   < 3W

   Ingress Protection   IP30

Application & Certification