Ads by Google
X-Messenger SMS Relay--
--Your ideal of Solution for : Remote Control,Monitoring & Alarming!
x-Messenger- Expandable GSM/GPRS PLC
incorporates a wide range of CPUs, expansions, various accessories and software, specially designed for GSM/GPRS wireless systems being used for remote measurements,
data logging, control, diagnostics and object via short text messages (SMS) or CLIP calls. Configurable messages sending from device with static (text) or dynamic (text and measured values)
content are a convenient way of passing important information to the monitoring center, or directly to the defined phone numbers. SMS messages sending or Call-out can be triggered by change of binary input state, reaching alarm thresholds, marker state change, counters and clocks.
In particular, x-Messenger shall possess industrial design, practical set of I/O resources& easy to use configuration software
tools. Multiple optional analog signals (0..10V DC) (0…20mA) ,(PT100) inputs built-in the module , make it possible to have
direct connection of sensors, which lowers the cost of building system. Hence, it can directly work with humidity sensors,
water level sensor, pressure transducers, flow sensors, smoke, gas, motion, shock and noise detectors, etc.
Specification:
| Model | EXM-12DC-D-R-V |
| Supply Voltage | 12 ~ 24 VDC |
| Inputs | 8 digital |
| Analog Input signal | no |
| Outputs | 2 relay(10A) |
| PWM | no |
| High Speed Count(I7,I8) | (I7,I8)60kHz |
| SMS | yes |
| Voice alarming | 1W speaker built-in & Call-out |
| GPRS | yes |
| Webcam Interface | no |
| Ethernet | no |
| Data logging | optional |
| Interface | 1 B-type USB ,1 Audio input/output ,1 RS232 & 1 RS485 |
| Communication protocol | Modbus RTU&ASCII |
| Expansion | yes |
| RTC | yes |
| LCD display with keypad | Optional |
| Alarming mode | SMS,Ring ,email,voice/Speaker |
| output control mode | SMS ,Call-In, Logic programme control |
Highlights at a glance
Ø Integral GSM 850/900/1800/1900 modem
Ø GPRS, SMS and CLIP support
Ø Autonomous login into GSM/GPRS network
Ø Different I/O configurations available
- 2DI/1DO, 4DI/2DO, 8DI/4DO
- Analog inputs (DC0…10V,0/4..20mA,PT100)
- Expandable up to 40DI/36DO,36AI/36DO
- Expandable up to 16 PT100 inputs
Ø RTC, Timers and Counters, High speed input
Ø Event based transmission
Ø Remote configuration via GPRS and user friendly eSmsConfig software
Ø Firmware upgrade via serial port
Ø Configurable filtration for digital inputs
Ø Relay (10A) and Transistor output optional
Ø Configurable output pulse width
Ø Default Real Time Clock (RTC)
Ø Backup at Real Time Clock (RTC) at 25 °C:100 hours
Ø 2 PWM channels(333Hz) optional
Ø Pre-configured standard functions, e.g. on/ off-delays, pulse relay ,counters ,
Watchdog function ,PI controller etc..
Ø Logic functions-AND, OR, NOT, XOR……
Ø Standard configure soft& Customized soft(Function block diagram)
Ø Data logging ( SD card socket built-in/ optional accessory)
Ø Access protection by password
Ø Diagnostic LEDs
Ø DIN rail/Wall mounting
Ø Max. 64 different short messages and voice alarms
Ø Max. 70 Unicode Characters in one short message
Ø Time-based and event-based SMS, Call-IN, Call-Out, Ring, voice &MMS
Ø IO status ,alarming message includes counters, analog values can be directly sent to Users
Ø Retentive memory capability
Ø 4-lines, 16-character per line, backlight display& keypad optional
Ø Standard Modbus RTU/ASCII/TCP communication protocol supported
Ø It’s optional for x-Messenger to act as slave or master in certain Modbus communication network
Ø 1 RS232, 1USB&1RS485 ports available
Ø Optional Ethernet Interface
Ø Optional speaker built-in
Ø 1 Socket of telephone crystal plug & 1 Audio output interface optional
Ø Camera Interface optional