Ads by Google
Grade | Density(g/cm3) | Hardness (HRA) | TRS(N/mm2) (Sample B) | Recommended Applications |
YS2T | 14.45 | 91.5 | 2380 | An ultra fine cemented carbide with tungsten powder and binder cobalt. Good toughness and wear resistance. Suitable for low speed cutting allowing a big rake angle, Ensuring the sharpness of the edges, Bearing a heavy cutting force and Achieving good surface finish. |
YL10.2 | 14.45 | 91.5 1600 (HV3) | 2880 | With good transversal rupture strength and wear resistance. It is suitable for low speed rough turning and milling of heat resistant alloys ,titanium alloys and fiberglass. |
Unit: mm
Specification | Recommend application |
Φ240×Φ25.4×1.5 | Cutting rubber |
Φ250×Φ70×3.5 | Cutting circuit board |
Φ280×Φ70×3 | Cutting fiber black paper |
Φ300×Φ90×3 | Cutting asbestos |
Φ300×Φ160×3 | Cutting asbestos |
Φ305×Φ30×3 | Cutting fiberboard |
Φ306×Φ228×2 | Cutting PVA |
Unit: mm
O .D | Tolerance allowed(O.D) | Tolerance allowed(I.D) | Tolerance allowed(Thickness) |
<30 | +0.5 0 | 0 -0.5 | ±0.1 |
≥30~~<120 | +0.5 -1.5 | +0.5 -0.5 | +0.2 -0.1 |
≥120~~<200 | +1.0 -1.5 | +0.5 -1.0 | ±0.2 |
≥200~~<250 | +2.0 -1.5 | +0.5 -1.5 | ±0.3 |
≥250 | +5.0 -2.0 | +1.0 -3.0 | ±0.5 |
We supply smooth cemented carbide cutter.
Grade and Specification: Various types available .
We can also arrange production according to your different requirements.
Good service attitude.
Hope to cooperate with you to reach win-win.
Smooth cemented carbide cutter