Ads by Google
2013 Newest Arrival!!! tesla,tesla coil,tesla mod is ready to sell
1. Electronic cigarette TESLA-VW specification
| Model | TESLA-VW |
| Battery capacity | 2200mAh |
| Amperage Limiting | 4A |
| Power range | 3.0-15.0W |
| Power increments | 0.5W |
| Thread | 510, ego series |
| Charging time | 3 hours |
| Colour | Black, Silvery white |
| Package | Transparent bag and carton box |
| Certificate | CE, RoHS |
| Warranty | 6 months after shipment |
2. Electronic cigarette Usmoku -TESLA-VW includes:
| Tesla body | 1pcs |
| 1DCT+1DCT inner | 2pcs |
| Desay 18650(2200mAh) | 2pcs |
| gift boxes | 1pcs |
| 18650charger | 1pcs |
Tesla Operational Functions
1. Basic Functions
1.1 Power Reset
When the OLED screen shows “Tesla,” The unit will boot into standby after 2 seconds.
1.2 Cut-off Protection
Activating the unit for longer than 10 seconds will trigger this safety feature, and the power output of the Tesla will cut off until the next button push.
1.3 Low battery detection
When the battery cell is depleted, or needs to be charged or changed, the unit will display the code “Low V.” The unit will cease to output until a charged battery is installed.
1.4 OLED display
When the OLED is set to display during use, it will show the corresponding information it has been set to display. If the OLED is not displaying any information, the screen has been turned off.
Tesla Function and Features
1. Constant voltage and Constant power (dual mode output)
In constant voltage mode, the output voltage can be adjusted between 3.0-6.0V in increments of 0.1V. In constant power mode, the output power can be adjusted between 3.0W and 15.W in 0.5W increments.
2. Single cell 3.7V battery input operational voltage is 3.2-5.0V
3. 3 button adjustments allow you to choose between 25 possible power settings, and 31 possible voltage settings.
4. Atomizer resistances check function which can test and display the resistance of the atomizer in OHMS.
5. OLED display, which can show the battery input and output voltage, atomizer resistance, output power, or short circuit warnings.
6. Short circuit protection, and reverse battery installation protection. If the battery is installed backwards, the control panel will switch to protected mode, so as to not damage the internal components of the Tesla.
7. Low voltage warning, will stop use of under-charged batteries and display the “Low V” warning.
8. Short circuit and Unsafe Amperage protections: The Tesla should detect external short circuits and disengage to protect the user. The tesla will also detect if the attached atomizers resistance is too low to safely draw current. In both cases the Tesla will disengage output automatically.