Ads by Google
HY aac
First : Technological Flow of Production Autoclave Aerated Concrete
Second : Ingredient pouring
1.Batching floor
Use:measure each raw material,after milling,use pouring machine for pouring.
2.Pre-Curing
3.Pouring mixer
Use:The pouring mixer is a mixing machine fixed on top of the block mould whose function is to mix material thoroughly before pouring so that they can made into AAC blocks.
4.Mould
Use:Slurry could be held in the combining of mould and side plate.After curing it would be soidified into block.The side plate could load the block which shall be cut by cutting machine and feed into autoclave to be hardened together with the trolley.
5.Side plate
Use: The mould and side harden and can shut the splendid attire pour the material thick liquid, put and maintain the solidification of foaming base body quietly , the side board bears the weight of the base body and carries on cutting, one yard of shelves , steaming raising again at the same time . Is it raise car to bear the weight of base body (with side board ) is it is it keep means of delivery of cauldron to steam to pass in and out to steam
Third:Overturn-cutting
1.Step moblie(Fixed) cutting machine
| JQF6.0 | JQF4.2 | ||
Name | index | Remarks | Index | Remarks |
Production capacity | 100-300 thousand M3/year | Annual production | 50-150 Thousand M3/year | Annual production |
Size of green body | 6*1.2*0.6 m | Net | 4*1.2*0.6 m | Net |
Cutting modules | 5/10 mm | Vertical cutting/cross cutting | 5/10 mm | Vertical cutting/cross cutting |
Precision of cutting | ±2±1.5±1.5 mm | Length, width, height | ±3±1.5±1.5 mm | Length, width, height |
Cycle of production | 5 min/mould | Vertical cutting/cross cutting | 5 min/mould | Vertical cutting/cross cutting |
Weight of production | 18 T | 12 T | ||
Industrial capacity of cutting machine | 12.9 KW | 11.4 KW | ||
2.Tilting plate machine
Use:After block wa cut,the tilting table turns it 90 degree, and remove the waste slurry that at the bottom of block.It can increase the usage rate.
3.Tilting hoister
Use: Upset hoist make base body (bring mould , side board) in sky 90 of upset, is it is it cut platform or cut car to put to hang, the drawing of patterns is cut . In addition carry on group mould mould frame and side board that return that drawing of patterns get off, is it transport to pour carriage return pour circulation on the line to hang.
4.Semi-finished hoister
Use:After cutting,semi-product hoist carry block to harden car for marshaling
5.Vacuum suction hood
Use:After cutting,the waste slurry at the top shall be removed by vacuum,so the use ratio raise up.
6.Hardening car
Use:The trolley is a carrier to carry the side plate and blank to cutter and leave autoclave
Forth:Finished Product Out Of Autoclave
1.Separator
Use:The separator is a special machine whose function is to separate the plaste block into piece,in order to be transfered and used.
2.Finished product hoister
Use:Carry the finished-product to packing line after autoclave,making final package.
3.Autoclave
NOTE:The Complete Project
Shanghai Huayu Machinery Manufacture Co., LTD has a lot of experience in developing and producting Aerated concrete equipment . We will provide the comprehensive services for our customers from the technical design of the whole production line, supporting auxiliary equipment selection, the entire production line installation,commissioning, the optimal design according to the formula of raw materials and the staff training. The operation of whole project construction will be in accordance with the most economical,environmentally,friendly and efficient way.
HY aac