rebar machine include fiberglass yarn racks,resin tanks and pre-formation,winding equipment,temperature control systerm,traction

1) Fiberglass yarn racks

It is used for set the fiberglass yarn and control the way of yarn,keep the yarn tie a knot,make the manufacture goes well.

2) Resin tanks and pre-formation.

They can make the fiberglass yarn have a totally impregnation and

Control the way of yarn’s working,make a preformation for the products.

3) The winding machine can control the distance and depth of screw,it drive by two 1.5kw motor.

4) The temperature control systerm can use control the heat temperature,   make the rebar have a totally solidify,with 28kw power.

5) The traction equipment can pull our the product in a special temperature,with a 5.5kw power motor.

6) The auto cuting equipment can cut into short length base on the needs,

with a 1.2kw motor.

7) The control cabinet is monitor the total runing of the rebar/rock bolt   machine.

Working voltage	380V/50HZ	Air pressure	0.4-0.6Mpa
Power	20Kw	Center height	1000mm
Number of winding heads	1	Winding dia.	Max. 32mm
Winding rotation speed	9-95rpm	Traction force	Max. 40Kn
Traction speed	0.1-1m/min	Clamping width	500mm
Clamping length	1200mm	Cutting speed	2850rpm
Cutting range	(WXH) 600X65mm	Length setting mode	Limiting switch
Cutting journey	700mm	Dimension	20000*1850* 1450mm