1, High flush speed 2, Water Saving 3, Easy to install and adjust the water level

 1, Bottom Entry Fill Valve: T6800

A, Material: ABS, POM, EPDM

B, Installation height: L1: 189~299mm, L2: 244~344MM

C, Thread form: G1/2'', G3/8'', G15/16''

D, Certification: UPC, cUPC, Water Mark, Water Conversation Cerfitication

E, Water refill rate: 0-36%(can be adjusted)

 2, Dual Flush Valve: T8100

A. Material: ABS, POM, silicon gasket

B. Installation height: L=184mm

C. Connect mode: For one-piece toilet or two-piece toilet

D. Function: Dual flush (can be adjusted)

 3. Push button

    Chrome push button

 A, Fill Valve

two flight screws design: Wanted water level could be achieved by adjusting the float by the two flight screwsHousing design: Float and waterseal component are covered by housing to avoid interference waterseal component: waterseal component design with four connect pole,Small construction with big torque arm on the waterseal component Patented buckle design: Buckle designed for easy height adjustment of the fill valve and easy to be locked Short float design: Float size is small, fill valve can rework when the water level is dropped 27mm-32mm

B, Flush Valve

High flush speed: High flush speed of 2.8L/S Wide Water level range: Water level range for full flush is 45mm-120mm; water level range for partial flush is 90-150mm Installation construction: Float Can rotate 360 degree,fit different postions for the tank Lock button: Lock button designed to adjust the float,and fix the float perfectly Good sealing: Silicon gasket with good life span and good sealing performance

 Bestter (Xiamen) Technology Inc.

 Add: 9-10 Buidling, Siming, Tong' an Industrial Zone, Xiamen, China. 361100

 Tel: 86 592 5795 715

 Fax: 86 592 5795 719

 Web site: www.bestter.com

Tank Fittings