1.One HDMI 1.3b input signal split to two HDMI 1.3b sink devices 2.Support 3D CEC 3.Compamtible with HDCP 1.2

The  New 1*2 HDMI Splitter 1080P Support 3D CEC use a single HDMI source,accessing to multiple HDMI sinks.The Splitter allows one HDMI devices to be split easily to two HDMI compatible monitors or projectors. The Splitter can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.

FEATURES

One HDMI 1.3b input signal split to two HDMI 1.3b sink devices

HDCP 1.2 protocol compliant

Support CEC

Support deep color 30bit, 36bit

Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC

Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

Support signal retiming

Support input up to 15metres AWG26 HDMI 1.3 standard cable length,

output up to 25metres AWG26 cable length

No loss of quality

Installs in minutes

Need DC5V/1A power supply

SPECIFICATIONS:                               HDSP0102M

HDMI version…………………………………………….…………………………….. HDMI 1.3b

HDCP version…………………………………………………………………………....HDCP1.2

HDMI resolution ………………………....24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i

Support video color format …………………………..…………….24bit/deep color 30bit,36bit

Support audio format……………….DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

Max bandwidth……………………………………………………………………………..225MHz

Max baud rate……………….…….………………….…………………………………..6.75Gbps

Input/Output TMDS signal ………….…………………………..……...… 0.5~1.5Volts p-p(TTL)

Input/Output DDC signal ……………………………………………..………… 5Volts p-p (TTL)

Input cable distance..…... …………………………….≤15m AWG26 HDMI 1.3 standard cable

Output cable distance…………………………….…...≤25m AWG26 HDMI 1.3 standard cable

Max working current……………………………………………………………………….....500mA

Power adapter format..Input: ……………....AC (50HZ, 60HZ) :100V-240V; Output: DC5V/1A

Operating Temperature range……..…………….………………………………… (-15 to +55°C)

Operating Humidity range………………………….….……….5 to 90%RH (No Condensation)

Dimension (L x W x H)       ……………………………….……………….…………86x45x25 (mm)

Weight…..………………………………………………………..…….…..……………………125g

Operating and Connecting

1.Connect one cable from HDMI source devices into HDMI Splitter input.

2.Connect one cable from each display (monitor or projector) into the HDMI Splitter outputs.

3.Connect 5V power supply to the HDMI 1x2 Splitter.

Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:

Serial NO	Trouble Description	Cause and Ways to deal with
1	Non-Power-Connencted	1,  Check if the power adaptor head is truly and correctly inserted the power socket. 2,Check the power switch if it is in on status.
2	No Picture	1,Pls to make sure that the TV is on and has been connected with the machine,. 2,To check if the signal source is on and well connected. 3,Check the system connection quality. 4,Check if the line is all good quality. 5,Check the cable quality( to see if the cable is compliant with the HDMI V 1.3..
3	Obscure Picture	1,To try again to connect the cable to be free from the unsuccessful connection. 2,HDMI Cable Quality(HDMI Cable is compliant with the HDMI V1.3)