extruder tech 65mm dia nylon monofilament manufacturing equipment

 Extru Tech 65mm dia Nylon Monofilament Manufacturing Equipment

STANDARD   SPECIFICATION

1.  INTRODUCTION

1) This equipment consists of 11 units ,as follows:

Extruden (including cooling water type tank);No.1 stretching roller stand;stretching bath

with steam heater (hot water type);No.2 stretching roller stand :stretching bath (hot air

type);NO.3 stretching roller stand;annealing bath(hot air circlulation type) No.4 stretching roller stand; ;apply softener device(one set);132spindles take-up winder.

2)  Not only whole equipment can adjust speed but also the any unit can also adjust speed.

3)  Power:380V,50Hz

2.  Details of each unit A.  Extruder

1).Screw Dia & L/D :    65mm,30:1,Rapid compression metering type

2).Revolution of Screw : 20---90r/min (rpm)

3).Material of screw:    Alloy steel 38 CrMoALA by way of nit riding pricdss

4).Driving Motor :    18.5kw-6 there-phase inducation motor

5).Control method: By inverter

6).Metering pump :  30ml/r, 2.2kw Cycloid Pin Wheel Reducer

7).Heating power :  20kw,6 parts temperature conbtrol.

8).Nozzle (the diameter of Nozzle hole as per the custom’s option).

Material of Nozzle: By stainless steel Cr18Ni9Ti

9).screw is easy disassemble

10).Cooling water tank :     two sheets of steel stainless

 Material of Cooling water tank : stainless steel.

 Attached accessories : water surface adjuster with overflow pipe, yarn guide and

 Separating bar, grooved guide bar, drain valve, rail and wheel

11).Cooling water tank easy moving.

B.   No 1 STRETCHING ROLLER STAND

Roller Method :  5 rollers double clover method

Roller Size :  5 pieces rubber-covered stretch roller

300mm dia *460mm length

2 pieces rubber covered Pinch Roller

164mm dia*440mm length

Roller Speed: 10—35 meters / minute

Equipped power: 2.2kw

Control Method: By use of Inverter

Material: Steel

Driving power of pinch roller :     By pneumatic pinch roller

C.  STRETCHING BATH(HOT WATER TYPE) ONE SETS

Water tank effective dimension : 3000mm(L)*450MM(W)*150MM(H)

Type & Method : Hot water system  , 

Material  : Bath Stainless steel

                  Frame  Steel

Heating System: Steam pipe for boiling water or electric heater. Power<18kw.

Attached accessories : Overflow Attachment

Water temperarture : 90—100

Water supply : Automatic

D.    NO 2 STRETCHING ROLLER STAND

Roller Method: 5 rollers double clover method

Roller Size :  5 pieces rubber-covered stretch roller

                        300mm dia*460mm length;

                        1 pieces rubber covered Pinch Roller

                        164mm dia*440mm length;

Roller Speed :   60—150 meters / minute

Equipped power :  5.5kw

Control Method :   By use of Inverter

Material  :     Steel

Driving power of pinch roller :     By pneumatic pinch roller

E.      NO 3 STRETCHING ROLLER STAND

Roller Method :  5 rollers double clover method

Roller Size:  5pieces rubber-covered stretch roller

                       300mm dia*460mm length;

                       1 pieces rubber covered Pinch Roller

                       164mm dia*440mm length;

Roller Speed:   60—180 meters / minute

Equipped power: 5.5kw

Control Method: By use of Inverter

Materrial : Steel

Driving power of pinch roller :  By pneumatic pinch roller

F.  ANNEALING BATH(HOT AIR CIRCLULATION TYPE)

Dimension :3500mm(length)*550mm(width)*1350mm(height)

                       4500mm(length)*550mm(width)*1350mm(height)

Type & method :By hot air ,with couple

Material : Bath stainless steel

                  Frame  steel

Heating system : By electric,power:12kw

Temperature :100—250,  with couple.

Power :1.5kw

Double way : hot air circulation type ,the flux and direction xan be adjusted.

With softness or oil device

G.   NO 4 STRETCHING ROLLER STAN

Roller Method :  5 rollers double clover method

Roller Size :  5 pieces rubber-covered stretch roller

                        300mm dia*460mm length;

                        1 pieces rubber covered Pinch Roller

                        164mm dia*440mm length;

Roller Speed            :     60—180 meters / minute

Equipped power         :     4kw

Control Method          :     By use of Inverter

Materrial                :     Steel

Driving power of pinch roller :     By pneumatic pinch roller

H.                APPLY SOFTENER DEVICE

The speed of Oil roller can be adjusted

With Auto circulation type add oil device.

I.   132SPINDLES TAKE-UP WINDER

Type of Winding: Single yarn(F1)Pin winding type

Winding Speed:  60—180 meters / minute

Spindle Number: 132 spindles inclusive of 12 spare spindles for changing.

Driving for Spindle: 5 kgf-cm torque drawing each

power:  2.2kw

Adjustment speed:  By viltage regulator.

Torque motor of Waste winder: 80kgf –cm.

Taizhou Winstrong Special Net Co., Ltd. is a manufacturer of fishing products in China. We mainly supply such fishing nets as polyethylene nets, nylon monofilament nets, nylon multifilament nets, nylon raschel nets, polyester raschel nets, and PE twist knotless nets.

We also supply various twines (nylon and polyester twine in spools and hanks), ropes (twist ropes, braided ropes), fishing net making machines (ZRD, ZRS, U-knot net machines and high speed net machines with big bobbins), rope making machines, and hooks. We make both single and double knot, and twist and raschel knotless nets. We also make complete gill nets and trammel nets.

We have exported our products all over the world and will do better with your help.

Extruder