Ads by Google
Pensky-Martens Closed Cup Flash Point Tester ( Base of Automatic low temperature )
Application
gd261 Series Pensky-Martens Closed Cup Flash Point Tester is used to determine flash point of specimen under specified condition, by closed cup method. It is widely used in petroleum product industry, related education school, scientific research units and other related departments.
The flash point of a specimen is the lowest temperature at which it can vaporize to form an ignitable mixture in air. It is one measure of the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions.
STANDARDS
STANDARDS | ISO2719-2002 | ASTM D93 | GB/T 261-2008 |
Note: this tester can conform to but not limit to the standards above, for more standards conformance, please contact us.
KEY SPECIFICATION
Model | gd261(Manual) | gd 261-1(Semi-automatic) | gd261a (Automatic) | gd261d(Full-automatic) | |
Temperature range | Room temperature~300°C | ||||
Temperature display | Thermometer | LCD | Color LCD | ||
Ignition mode | Ignition source, manual | Ignition source, automatic | |||
Repeatability | r=0.029X | ≤2°C | |||
Reproducibility | R=0.071X | ≤4°C | |||
Power supply | AC220V, 50Hz | ||||
Environmental temperature | ≤35°C | 10~40°C | |||
Relative humidity | ≤85% | ≤80% | |||
Power consumption | ≤650W | ≤500W | |||
Feature | 1. Manual adjust heating speed, 1~12°C/min; 2. Read temperature value on thermometer. | 1. Automatically control heating speed; 2. Real-time display temperature on LCD; 3. Press record button to display and retain flash point value on LCD when flash point appears. | 1. Automaticallyadjust heating speed, determine flash point;2. Can store 100 groups data and print test results; 3.Automatically calibrate theeffect ofatmosphere pressure andcalculate correction value. | 1.Full-automatically adjust heating speed, determine flash point;2. Can store 100 groups data and print test results; 3. With USB interface, possible to connect with PC;4. Forced air cooling function.5. Automatically calibrate the effect of atmosphere pressure and calculate correction value. | |