Ads by Google
High efficiency relief engraving CNC engraver
1.multiple spindles improve working efficiency , the middle one is 3.0kw aircooled, other four is 2.2 kw watercooled, mainly for engrave relief on wood, MDF etc.
2.Y axis adopts square orbit and gear rack transmission, so keep high precision;
3.Table: T-Slot, could choose vacuum table;
Suitable Materials
Wood, Plastic, Aluminum, Di-Bond, Engraving Board, Foamex. Engineering plastics, marble, acrylic, Perspex, PVC, Composite panel, Copper, Alloys, MDF, etc.
Technique Parameters:
NO. | Description | Parameter |
1 | X,Y,Z Working Area | 1200X1800X120mm |
2 | Table Size | 1450X2440mm |
3 | X,Y,Z Traveling Positioning Accuracy | ±0.05/300mm |
4 | X,Y,Z repositioning Positioning Accuracy | ±0.05mm |
5 | Table surface | T-slot Extrusions |
6 | Frame | welded tubular steel |
7 | Guideway | Hiwin lInera square rails |
8 | Transmission | Rack and pinion on xy |
9 | Max. Power consumption (Without spindle) | 1.8Kw |
10 | Max. Rapid Travel Rate | 25000mm/min |
11 | Max. Working Speed | 1500mm/min |
12 | Spindle Power Motor | 3.0kw aircooled in middle, other four are 2.2kw watercooled |
13 | Spindle Speed | 0-24000RPM |
14 | Drive Motors | Stepper Motors (Option:2.0kw HSD spindle) |
15 | Working Voltage | AC220V/50/60Hz (Option:380V) |
16 | Command Language | G code |
17 | Operating System | NC STUDIO |
18 | Interface | USB |
19 | Flash Memory | 128M(U Disk) |
20 | Collet | ER16 |
21 | X-Y Resolution | <0.01mm |
22 | Software compatibility | Artcam, TYpe3 |
23 | Running Environment | Temperature: 0-45 Relative humidity: 30%-75% |
24 | Packing Size | 1750X2350X1750mm |
25 | Net Weight | 1800KG |
26 | Gross Weight | 1850KG |
All parameters above subject to change without prior notice | ||
High efficiency relief engraving CNC engraver