1)high strength and the anticorrosion material 2)accord with the industry standard 3)function of selection of card recycling

1.2 Elementary functional discourse

(1)With options to quit cards and callback cards if overtime under jamming

(2)With options to quit cards or callback cards in force under jamming

(3) With options to quit cards or not quit cards if overtime.

(4) With options for the time of quitting cards if overtime

(5) With the function of avoiding wrong collection and card following. If the movements of the first card is not be finished, the second cards will not be collected.

(6) The signal of enabling of monitor computer and open can be offered.

(7) The validation or invalidation of cards can be received.

(8) Sound and light alarm in error condition

1.3 Card material

All kinds of paper cards and PVC/ Mylar cards

1.4 Net of card collector

About 0.7kg

1.5 Collect time

About 2S

1.6 Electrical Specifications

Rating Voltage:  24VDC±10%

Current Consumption: Peak-2.2Amp

Static Consumption: 0.1Amp

1.7 Environmental Specification

Temperature: -40°C to 85°C(industrial)

Relative humidity: 30%-90%

Location: Within a suitable cabinet

1.8 Control interface description

TTL electrical level control interface is offered by the TCR-615 card collector which is educed by the CN1 of electrical outlet in the control broad. The socket connectors with 2.54mm space between is used as electrical outlet.

1.8.1 Interface description

1.2.1-1 description of pin of CN1

code of pin	Signal name	Signal description
1	GND(0 V)	power
2	+24V(DC)
3	GND	0V
4	Receive	Low voltage is effective(the last time exceed 200ms)
5	Reject	Low voltage is effective(the last time exceed200ms)
6	NC	non use
7	Enable	10K upward pull input,Low voltage is effective
8	NC	Non use
9	Received	Output open collector,Low voltage is effective(about500ms)
10	GetCard	Output open collector, Low voltage is effective
11	Rejected	Output open collector Low voltage is effective
12	jammed	Output open collector Low voltage is effective

1.8.2 Control signal description

Receive   the signal of receive is input when Getcard output is effective signal (low voltage). The card is collected into the warehouse ( with high voltage in the collecting procession) The signal can be trade as the input signal of card collecting in force under jamming.

Reject  When GetCard output is effective(low voltage)the reject signal is input,card is quitted (GetCard is high voltage within  the quitting procession ). The signal can be trade as the input signal of card quitting in force under jamming.

Enable  The card collector is permitted to work under low voltage. The card collector is prohibited under high voltage. The signal of enable can be used as the input of vehicles detector.

Received   input the low voltage signal with the width of 200ms which can make the barrier gate open after the card being received to the box.

GetCard     The pin will input the low voltage when card entry from the entrance of the card collector. The low voltage will last until the monitor computer sends the receiving/quitting signal or card quitted as to overtime.

Quitting card if overtime   the card will be quitted automatically  and the “rejected” signal  will be input after the waiting time exceed T1.The range of T1 is determined by the DIP1 and DIP2 of the switch S1

DIP1	OFF	OFF	ON	ON
DIP2	OFF	ON	OFF	ON
Time	rejection	3S	10S	30S

Rejected      The pin will input the low voltage signal (lasting about 200ms at least) until the cad is took away or took back after the card quitted to the entrance.

Jammed   Card jammed or the card is in the reading place waiting for the signal of receiving/ quitting.