Ads by Google
Features and Benefits:
High luminance,internal graticule CRTJapanese electronic encoder,light,handy and reliableFully sealed long live vertical mode switchALT Triggering Function. Two indepen dent signalssimultaneous observationBuild-in 6 Digit Frequency Counter20MHz/40MHz Dual Channel10 times sweep magnificationTV Synchronization,X-Y modeSpecifications
Model | MOS-620CF | MOS-640CF | |
Virtical Systems | Sensitivity | 5mV∼5V/DIV | |
Accuracy | ≤3%(10 to 35) | ||
sensitivity of fine-turn | 1/2.5 | ||
Frequency bandwith | DC 20MHz | DC 40MHz | |
Reise time | 17.5ns | 8.75ns | |
Input resistance | About 1MΩ/25p F | ||
DC balancing mobile | 5mV∼5V/DIV:±0.5DIV | ||
Linear | 2DIV,±0.1DIV | ||
Vertical mode | CH1,CH2,DUAL,ADD | ||
Intermittent | About 250kHz | ||
Input Coupling | AC GND DC | ||
Input Maximum Voltage | 400Vp-p | ||
Common-mode rejection ratio | Its 50kHz ,501 | ||
The insulation between the two channels (at 5m V / DIV range) | 150kHz 1000:1 | ||
15MHz 30:1 | 35MHz 30:1 | ||
Trigger | Trigger Signal Source | CH1, CH2, LINE, EXT (You can select CH1 or CH2 when it's DUAL orADD, you can use CH1 and CH2 turn trigger, when pressed TRIG.ALT switch, when it is ALT | |
Coupling | AC20Hz to 20kHz | AC20Hz to 40kHz | |
Polarity | +/- | ||
Sensitivity | 20Hz-20MHz:0.5DIV TRIG-ALT:2DIV EXT:200m V | ||
2MHz∼20MHz:1.5DIV | 20MHz∼40MHz:2.5DIV | ||
TRIG-ALT:3DIV EXT:800m V | |||
TV:1DIV EXT1V | |||
Trigger Mode | Auto,norm,TV | ||
Input impedance | About 1MΩ/25p F | ||
Maximum Input Voltage | 400V(DC+AC PEAK) | ||
The level of the system | Scan time | 0.2us ∼0.5us/DIV | |
Accuracy | ±3%(10to 35) | ||
Fine-tuning | ≤ 1/2.5 scale fine-tuning panel instructions | ||
Expanded | 10-fold scan | ||
× 10MAG scan time accuracy of the linear | ±5%0.2us ∼0.5us ±10%0.2us ∼10.5us | ||
the displacement by× 10MAG caused | ≤2DIV | ||
X-Y model | Sensitivity | The vertical axis sensitivity | |
Bandwidth | DC 500kHz | ||
X-Y phase | ≤3°DC O∼50kHz | ||
Calibration signal | Waveform | Square-wave | |
Frequency | About 1kHz | ||
Duty cycle | ≤48:52 | ||
Output Voltage | 2V p-p±2% | ||
Output frequency | 1kΩ | ||
CRT | Models | models 6-inch, rectangular, internal calibration | |
Phosphor standard | P31 | ||
Accelerating voltage | About 2kV | About 12kV | |
An effective screen area | 8×10DIV[1DIV=10mm(0.39in)] | ||
Scale | Internal scale | ||
Trajectory rotating | Panel is adjustable | ||
DISPLAY | Display mode | LED | |
Display digits | 6 | ||
AccessoriesPower cord ------------- lUser manua l--------- 1Probes ------------------2