Ring shank wood Flooring Nails 1.Material:Q195 2.Flat Head, Diamond Point 3.Smooth Shank 4.Finish:bright Ring shank wood flooring nailsThe following types of wood flooring nails have been particularly designed for the flooring industry, to be used in the installation of carpet tack strip, metal moldings, and plywood underlayment. Because of their specific design, Halex strongly recommends these types of nails on wood subfloors.

Halex has selected several types of general purpose construction nails that have applications in installation on wood subfloors. The following types of wood flooring nails have been selected or modified by Halex to be used in flooring installations predominantly as stay nails to temporarily hold the carpet in position during installation, but may have other applications as well.

Ring Shank Wood Flooring Nails

Ring shank wood flooring nails provide better holding power in all wood products than smooth shank nails of the same length. The 3/4 inch nail is the standard wood flooring nail used in pre-nailed wood carpet strip. It has the same holding power as a 1-1/4 inch blue lath nail. The 1 inch ring shank nail is used to install carpet strip in heavy duty installations.

Longer wood fooring nails have countersunk heads for easier finishing and are used to install new underlayment and to reinforce existing subfloors made of plywood or other wood products. The 1-1/4 inch and 1-1/2 inch wood fooring nails are also available with corrosion resistant plating for use on wood underlayment that will be covered with water based patch or adhesive.

Product #	Gauge	Length(in inches)	Approx.Nails per Lb.
HN - 512	13	3/4	688
HN - 516	13	1	508
HN - 520	13	1 1/4	327
HN - 524	13	1 1/2	268
HN - 528	13	1 3/4	229
HN - 532	13	2	149