single set nail polisher machine

SPECIFICATIONS

VOLT:AC100V-240V 50-60Hz

POWER: 4-26W

SPEED: 3,000-15,000 r/min

COLLECT TYPE: Φ2.35 mm

USING STEPS

1. Plug the tool to appropriate electric power.

2. Choose a bit in request(diameter of handle should beΦ2.35 mm), press shaft lock button and loosen collect nut, then inset the bit and tighten the collect securely.

3. The machine will begin to work when the switch is turned to ON, and the speed can be adjusted by rotating speed turn knob.

4. Please turn switch to OFF and make sure the machine cools down before changing another bit.

5. Always make sure the machine unplug after use.

6. Clean the machine with soft cloth. Never use cleaning solvents or detergents.