-Grey iron -Much experience in design and manufacture -20 years experience

-Grey iron -Design and manufacture as  your requirement -Strong engineer team -20 years experience

Iron Ingot mold:

 is a cast iron mould which is used for solidification of molten steel in order to form a special  ingot.  Ingot mould is an essential and turnover bulk producing equipment. It impacts both the outsurface and inner quality of the ingots.

       1. Material: cast steels GS45 DIN1681     2. Mechancial properties:

Tensile strength	min. 230MPA
Yield strength	min.450MPA
Elongation	Min.20
Reduction of area	Min.35

    

   3.Delivery condition: normalized 

 

   4.Quality assurance

The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000.The standard documentation ensures the full traceability of every process step:Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition,Mechanical properties and non-destructive examination;Dimensional check supported with a “as-built“ sketch;Record of the quality heat treatment

( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v1/754116505_1/cast_iron_ingot_mold.jpg' , 'http://i01.i.aliimg.com/photo/v1/754116505_2/cast_iron_ingot_mold.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); cast iron ingot mold