Ads by Google
Detailed Description:
1.Two types: LJC150-600mm ; LJC150--1000mm
2.Pipe internal diameter : 150-1000mm
3.Pipe Length: 1000mm
( special specification can be made according to your order)
4.Pipe with the end connection of flat mouth type, socket and plug type,etc.
5.Pipe making material can be easily found mainly are stone bits,slag,fly ash,sand,and the cement of 20% .
Feature:
1- high efficiency : 10--15 sections per hour!
2- saving material and labor, taken up less mould!
3.Simple stucture and easy to be operated
4.Widely used in irrigation,motor-pumped well, small-scale pumping station,drainage facility and highway culvert.
Main performance parameter and performance index
Parameter Name | LGC150-600 type | LGC150-1000 type |
Pipe diameter(mm) | 150-600 | 150-1000 |
Pipe length(mm) | 1000 | 1000 |
Spindle Speed (r/min) | 55-92 | 35 |
The speed of spindle rises and falls (m/min) | 5 | 5 |
Main mortar power (kw) | 7.5 | 11 |
Attached mortar power (kw) | 1.5 | 1.5 |
Production efficiency (m/h) | 18-22 | 13-16 |
Structure Introduction and transmission system
The operational principle of LGC vertical extrusion pipe machine is : the main mortar leads the discharge head rotation inside the pipe mould through main axle of the machine , and depends upon the discharge head and main axle's dead weight, exerting the pressure to the concrete inside the mould by presser foot which is on the discharge head . The concrete joins unceasingly in the pressure of the discharge head, and becomes dense then shapes the pipe gradually.
key component of the machine has: Main frame, power system, jacking system,(lifting system), internal water system ,mould, working platform, pushing car , power distribution part and so on.
1,Main frame: the machine has a frame structure combined with the top carriage and the bottom carriage which make it easy to be dismantled and transported .Moreover ,it has reasonable design and compact structure.
2,Power system
Control main axle revolving, provides the power for the tubing formation. Mainly composed by the mortar, pulleys, gears, sleeve, spindle and so on..
3,Jacking system: Controls main axle's rise and the drop,mainly composed by the vice-mortar ,hoist , elevator, steel wire ,falling iron and so on .
4,internal water system : enhance the anti-seepage performance and anti-intrinsic pressure inside , and reduce (lighten)the wear of the discharge head and presser foot at the same time .mainly composed by the water tank ,the penstock ,the tap switch ,etc.
5,mould parts: the major component of shaping the pipe ,composed by three parts the pipe mould(outer mould) ,the discharge head unit(inner mould), the bottom die(bottom plate) .Of them the discharge head unit concludes the container ,the presser foot and the tap ,etc.
6,Working platform:. For the placement and fixed tube mould .The LGC600 working platform is a stationary type and the LGC is a portable-type combined with a moving track.
7, pushing pipe car : used to ship the pipe mould and transport the concrete .
8,power distribution part : control the main and the vice mortar to rotate on the clockwise, the reverse, or to stop according to the pipe making craft. Mainly composed by the distribution box, the overtravel-limit switch (position switch),`electric cable ,ect.
9,Other
1) Ton mouth apparatus: Used in processing upper opening of the small caliber pipe
2) Lifts tube apparatus: Used in transporting the heavy-caliber tubing.
3) Vibrator: Used in producing the Three Contacts, four and the heterogeneous tubing.
-----Non-reinforced concrete pipe mould
Moulds includes three parts:
1Outer moulds
2inner moulds(also called discharge head)
3bottom plate(bottom die)
Note: each type needs at least two pipe mouds,one discharge head
------10--15sections/hour
-------Container,pressure foot,and tap are the pars which have their working service time(better prepare enough)
150---1000mmMoulds of LJC type Vertical Extrusion Concrete Pipe Making Machine