High quality plastic electric box mould: --Mould steel :H13 --Hot runner --Mould life more than 5,000,000      Dear Sir/Madam, We would like to introduce for UCAN MOULD  with Serivces: Experience & rangeIndustrial plastic products cover a wide range including Industrial crate mould, Pallet mould,Electrical application part moulds, PVC pipe fitting mould and many more. These industrial products are produced in rigid plastic material including High Density Polyethylene (HDPE), Low Density Polyethylene (LDPE), Polyvinyl chloride (PVC) and Acrylonitrile Butadiene Styrene (ABS). Mould designThe most essential points to be noted before selecting the right steel for these moulds are understanding the complexity of the part, material flow, doing the structural analysis and providing a suitable ejection system for the product. Many times it is important to do the mould flow analysis before mould designing and planning the assembly and functionality of the mould  Mould structureEvery industrial product mould needs to achieve the exact part dimensions and part weights hence it is important to consider the shrinkage of the material after moulding. For this the gating system, cooling lines, quality of hot runners play an important role in achieving a good end product. Mould cooling time in crates, pallets, electronic part and pipe fitting moulds is the biggest factor to be considered for high end productions. Many tool makers use regular cooling designs for these product, however customized cooling systems need to be designed for every part separately. Optimization of cooling process can save many thousand dollars in the overall cycle period during production. Even cooling lines are considered as the backbone of the product function in many cases of industrial category especially in the cases of multi cavity complex moulds. Hardness control & QualityIn the next stage, the choice of steel determines the life of the mould. The most commonly used steel for HDPE crates and pallets is China P20 for the core and cavity and C45 steel for the mould base. The hardness of the steel is 35 – 38 HRC. With the use of China P20 one can run for at least 500000 without any glitches. Parts made from PVC require steel such as 3Cr13 (type of a stainless steel) from China which helps the material flow well without sticking especially in cases of hollow products such as pipe fittings. This mould steel does not require chrome plating or polish and the hardness is strong enough to produce more than 0.5 millions shots. UCAN MOULD has the enough experience and expertise in crates, pallets, PVC parts and electrical parts. Mould delivery timeFor complex moulds such as the above we believe in completing projects with 50 -70 days.Depending on the complexity and type of product we can promise the fastest delivery possible from our end.

Warmly welcome to inquiry our moulds.

Best regards,

Vicky

 Taizhou Huangyan ucan plastic & Mould Co.,Ltd

 Address: Ximen Industry Zone, Huangyan, Taizhou, ZheJiang, China

 P.C:318020

 TEL:+86-576-84408951

 Fax:+86-576-84408952

SKYPE:cnmould

  Website Http://www.ucanmould.com

Plastic cable chute mould