Ads by Google
JUNYU raymond mill mining equipmentc
introduction
1.Raymond mill is suitable for all kinds of ore, coal preparation, such as raw ore, gypsum, coal and other materials, powder processing.2. Raymond mill looked like the erection of a steel container from the shape, with inlet, outlet, a central feed port. The outlook is a little like MPS mill shape and some approximation. The turn center line of raymond mill is the vertical stick, MPS roller mill Grinding stick rotary centerline is horizontal.
3. Raymond lower part of the internal grinding motor driven rotating disc will need to stick with the grinding material crushing, or grinding, into the air by the wind blowing the finished material, within the upper part of a separator mill can be separated coarse and fine powder, and then through the adoption of Raymond wind out of the outlet from the collection.
application
Raymond scope of machine is mainly used barite, calcite, feldspar, limestone, talc, Whitehead, gypsum and so on. Mohs hardness of not greater than 9.3 and humidity below 6% of non-flammable mineral products, chemicals, building materials, such as hundreds of material for high fine powder generation and processing, product size 400 mesh in the range of 40 ... Arbitrary regulation. This series of products is divided into, high pressure micropowder mill, Crush suspended roller mill, Raymond Mill several models according to different materials, different fineness, different production, etc.
technical
Model | Grinder roll amount | Maximum feeding fineness(mm) | Fine powder fineness(mesh) | Output(t) | Motor power(kw) | Fan motor power(kw) | analytical engine power(kw) | Dimension(mm) |
3R1510 | 3 | 10 | 80-325 | 0.3-1.2 | 7.5 | 5.5 | 1.1 | 3200*2100*4500 |
3R2115 | 3 | 20 | 80-325 | 0.4-1.6 | 15 | 11 | 2.2 | 4100*3300*4500 |
3R2615 | 3 | 20 | 80-325 | 0.5-2.7 | 18.5 | 15 | 2.2 | 4300*3500*5100 |
3E2715 | 3 | 20 | 80-325 | 0.7-3 | 22 | 18.5 | 2.2 | 5300*4100*5200 |
4R3016 | 4 | 20 | 80-325 | 0.8-5 | 30 | 30 | 2.2 | 5300*4100*5200 |
4R3015 | 4 | 25 | 80-325 | 1.0-4 | 30 | 22 | 2.2 | 5500*4300*5400 |
4R3216 | 4 | 25 | 80-325 | 1.0-8 | 37 | 30 | 5.5 | 7100*5900*7900 |
4R3220 | 4 | 28 | 80-400 | 1-10 | 45 | 37 | 5.5 | 8000*6000*9500 |
5R4119 | 5 | 30 | 80-400 | 5-10 | 75 | 75 | 7.5 | 9200*7250*97 |
JUNYU raymond mill mining equipment