WIM MIG Welding Machine 1. Inverter Technology 2 Portable Design 3 High Efficiency and Energy Saving 4.CE&ISO Approved

WIM brand MIG Welding Machine (Model:IM200)

FEATURES

1. Long welds can be made without starts and stops

2. Minimal post weld cleaning is required

3. Reductions of smoke and fumes

4. Superior quality welds

5. Free of spatter and Low distortion

6.Easy to operate,convenient,high arc striking success rate

7.It can carry out continuous welding and disconnected welding,and continuously provide wire feeding wihtout interruption

8.Litter welding spatter,deep welding pool,stable welding,good welding surface,good heat resistance and crack resistance,small distortion when heated.

9.Be applicable for low carbon steel,high strength steel,alloy steel,soft steel etc.Be able to match various wires.

10. Service:1 year warrant,Engnieers analyze and solve problem

TECHNICAL CHARACTERISTICS	IM200
Input Voltage	Single Phase 220-240V
Rated Input Current	29A
Idle Voltage	43V
Output Current Adjustment	40~200A
Rated Output Voltage	24V
Rated Duty Cycle	60
Power Capacity	6.4KVA
Power Factory	0.93
Efficiency	85
Wire Feeder	Built-in
Post Flow Time	1 S
Coil Diameter	280mm
Wier Diameter(MM)	0.8/1.0
Weight	19.4KG
Dimension(MM)	500*290*460
Applicable Board Thickness	Above 0.8mm
Insulation Class	B
Enclosure Protection Degree	IP21S

STANDARD ACCESSORIES

                                                

   

               MIG Torch                                                         Co2 Gas Flowmeter Regulator

PACKAG  &  STOCK  

CERTIFICATES

WIM brand MIG WELDING MACHINE IM200