Ads by Google
TL-VDC4200 Chairman Unit
Push button switch for MIC ON/OFFRed ring luminant to identify live unitUnidirectional electret condenser microphoneBuilt-in chipcard reader for user identification Back-lit LCD screen for dynamic status display Up/down channel selectors for six languages Dual 3.5mm headphone jacks with level control Automatic gain control (AGC) to prevent acoustic feedback Supports automatic video camera tracking Frequency response: 50Hz to 18kHz S/N ratio at 1mV input level: -95 dB Sensibility: -46±4dB Power input: 24 VDC Effective pick-up range: up to 60 cm Microphone stem length: 41 cm ABS base dimensions: 150x135x50 mm (L*W*H) Dual-shielded captive cable length: 50 cm Portable or fixed tabletop mountingTL-VXC4200 Chairman Unit
Push button for MIC ON/OFF Priority button to override all active delegate units Unidirectional electret condenser microphone Red ring luminant to identify live unitBuilt-in chipcard reader for user identificationBack-lit LCD screen for dynamic status displayUp/down channel selectors for six languagesDual 3.5mm headphone jacks with level controlAutomatic gain control (AGC) to prevent acoustic feedbackSupports automatic video camera trackingFrequency response: 50Hz to 18kHzSensibility: -46±4dBPower input: 24 VDCEffective pick-up range: 60 cm Microphone stem length: 41 cmABS base dimensions: 150x135x50 mm (L*W*H)Dual-shielded captive cable length: 50 cmPortable or fixed tabletop mountingTC-F06 Interpreter Console
The TC-F06 interpreter console is a digitally-controlled workstation allowing two interpreters to work in turn.
Designed to be used for 6-channel simultaneous interpretationGooseneck microphone and headset microphone can be usedBuilt-in loudspeaker with volume level controlLCD screen for specific information display3.5mm jacks on both sides for MIC input and headphone/recording output3 incoming languages can be preset, with pre-select A/B/C keys.Automatic channel interlocking prevents interpreters from using same outgoing channelRelay interpretation allows the interpreters to work from an active channel other than the floorMUTE key to enable a brief muting of the microphone for cough cutSLOW key to alert the current speaker to speak slowlyLoudspeaker is automatically switched off when MIC is on or headset is usedThe floor signal goes to each output channel after the microphone is switched offMultiple interpreter consoles can be connected in a daisy-chainDesigned to comply with all related international standards & requirements.| Frequency response: 50Hz-18kHzDistortion at 1 kHz: < 0.1%Channel separation: > 85 dBSignal-to-noise ratio: > 90 dBMax. input power level: 7.5VOperating voltage: 24VPower consumption: 2.5W | 8Ω/2W built-in loudspeakerOperating temperature: 0-50Standard mic stem length: 425 mm128x64 backlit LCD screen3/5/10m cable with DB25 connectors3.5mm jacks for mic, headphone, recorderABS base: 247 X 145 X 95mm |
TC-Z3 Central Control Unit
Provides DC power to all contribution unitsMaster, treble, bass volume level control3 microphone modes can be selected on the front panelSimultaneous active delegate units can be preset from 1-4FSC function to prevent acoustic feedbackConnects contribution units in up to 4 linesDB25 connectors for interpreter unit & IR/DSSS system13-pin DIN connector for additional extension unitCan be controlled via PC/software if requiredParallel port for interpreters unitParallel port for IR/RF interpretation systemRS 232 port for computer controlRS 485 port for dome camera controlBuilt-in automatic video matrix switcher4 x video input sockets & 2 x video output socketsRCA audio outputs for external equipmentPower requirement: 110/240VAC, 50-60HzPower capacity: 300WFrequency response: 20Hz to 18kHzS/N ratio at 1mV input level: -95 dBDistortion at 1kHz: < 0.3%Operating temperature: -20 to 50Dimensions: 423×90×320mm (W*H*D)