Ads by Google
BT-505
Micro-Crystal & Diamond Dermabrasion
Operation instruction
INTRODUCTION
(1) Crystal peeling
Crystal peeling instrument is a strong beauty storm from Europe and America, which leads the new fashion of the beauty revolution. It’s with natural crystal powder and air current to touch the skin softly. The aged skin will fall up with the effect of crystal powder, meanwhile, the vacuum functions remove the aged cells with a result of stimulate the skin to grow and renew.
The Crystal peeling is based on the principles of exfoliation. Different from many other chemical exfoliations available today, it is a dry exfoliation method that is safe to use on many parts of the body including the face area. Exfoliating can also be understood as the removal of dead skin cells. By using the special crystals we provide, it can help smoothing out wrinkles and fine lines. It is also very beneficial for scars left from wounds or chicken pox. It also helps to unclog pores, stimulate the circulation of the skin, eliminate dead skin cells from the top layer of the skin and improves the skin’s ability to retain moisture. Giving the skin a more youthful and healthy appearance.
Nature and dull skin benefits from the anti-ageing effect thanks to exfoliation, which reduces wrinkles and fine line and stimulates cell regeneration. Suction creates micro-drainage and firms the skin. Dry and sensitive skin is revitalized as dead skin cells are removed With the result that products used after treatment (face masks, creams, etc.) work better. the skin is unblocked and elasticity is restored. Greasy and problem skin becomes clean and clear. Pores are closed, the skin texture is refined, and imperfections are reduced.
(2)diamond peeling
The Diamond Dermabrasion, it is a creative improvement of the Micro-crystal Dermabrasion. The Diamond Dermabrasion provided a non-surgical skin refinish procedure, by using sterile diamond heads to abrade or rub off the top skin layer, then Vacuuming out the particles along with any dirt and dead skin back up.
This procedure removes skin debris, imperfections, blemishes, wrinkles and unwanted pigmentation on the skin. Moderate usage of Diamond Dermabrasion, accompany with skin products that penetrate through top skin layer that reach the dermis level, helps to replenish natural nutrients, restore cell activity, and promote skin health. The results after Micro Dermabrasion treatment is usually a healthy, glowing, beautiful skin.
(1)Micro-Crystal AASSEMBLY
Remove the machine from its carton and place it on a flat area free of any liquid.
Place the hand piece tower rod in the vice on the back left side of the machine and tighten.
Connect the 2 hoses from the hand piece to the back of the machine where you will see two fittings.
Fit the tubes into the appropriate fittings. Push both until they stop. (If they are not fitted securely, the machine will not work correctly). Tug the tubing. It should feel tight.
Plug the machine into a correct electrical outlet.
Turn on the power switch. Make sure that the switch lights up and that you have power.
Remove the hand piece from the holder and check for vacuum pressure by liking. Be careful not to leave the hand piece over any one area for more than 5 seconds.
You should feel sufficient vacuum pressure and check for wastes entering into the waste bottle.
YOUR CRYSTAL PEELING MACHINE IS NOW READY TO OPERATE .
PREPARATION
1.Prepare cold towels or other likes. The towel should be damp not wet.
2.Sterilize hands and put on disposable latex gloves and Disposable respiratory mask
3.Remove all jewelry on the client.
4.Prepare the skin surface for treatment by first cleansing the area using the prescribed cleanser. You must also cool the skin down by using chilled towels. This will remove any residual cleansing product left on the skin.
5.Make sure the skin is dry to the touch.
6.Take your hand-piece, making sure it, especially the cap, is
either properly sterilized or replaced.
7.Begin treatment.
8.Once completed the treatment, you must cool the treated surface of the skin by applying cold towels. Keep doing this until the skin becomes cool to the touch.
9.The skin has just experienced an abrasive treatment. It is normal that there may be some redness as well as a warm effect.
10.Make sure the clients do not use any other abrasive product on the skin, as it may cause an adverse reaction.
Prior to beginning the Crystal Peel treatment, make sure that the skin is dry to the touch. Depending on the service and skin condition, you may choose to use one pass or many slightly longer timed passes. Movements should be gentle and rhythmical, but not irritating or uncomfortable. Treatments can be done slowly and in detail-up to 30 minutes FOR THE ENTIRE BODY.
A slight reddening after the treatment is a normal reaction.
When working on the face, be sure to follow the pattern of the flow chart(se face flow chart).
If working on the body, be sure to use both horizontal and vertical strokes in a “fiber” type action. The strokes may be rapid and repeated over the same area to ensure coverage before moving on to the nest skin area.
Operation
1 Put the instrument on a clean and flat place.
2. Put the powder into the bottle and the powder is no more than 2/3 of the bottle.
3. Keep the instrument connected.
4. Plug the power wire and turn on the machine. Make sure the
Machine is ready to work.
5. First use the handle to test the suction and then adjust the intensity.. The pen cannot be kept on the certain skin within 5seconds.For the whole face the time should be15 to 20 minutes.
6. During the process of treatment, use forefinger and middle finger to distract the skin. Please refer to the pictures:
Remarks: these pictures just of reference. The treatment should be according to clients’ skin, treatment parts to adjust intensity time and direction.
1 Adjust intensity according to different skin.
2 Please keep skin dry. Please choose one treatment or more according to the nature of the skin. When use the pen, it should be used softly and please don’t use it very strongly. After operation if the skin is a little red it is normal.
Notice:
1 The powder should be no more than 2/3 of the bottle.
2 Please don’t use the powder that other suppliers offer. Any problem caused by using other suppliers powder is out of our
3 The powder should be kept in a dry container.
4 After finishing the treatment, please clear the recycling bottle and the powder cannot be reused.
5 Please don’t forget to clean the filter.
NOTES to CRYSTALS
· Do not overfill crystal container.
· Never allow used crystal container volume to build up more than half the capacity of the reservoir. This will lead occlusion of the filter inside and can damage your machine.
· Empty used crystal container at the end of each day. Never leave used crystals in your machine overnight.
· Never put anything other than crystals supplied by the manufacturer in your machine. Other than crystals supplied by the manufacturer in your machine.
Other crystal products may clog your hand piece and damage your machine.
YOUR WARRANTY DOES NOT COVER MACHINE DAMAGE CAUSED BY THE USE OF UNAPPROVED CRYSTAL PRODUCT.
· Storage of crystals is very important. Store crystals in a dry place in the original container with the lid securely closed.
CAUTION
· When not in use, your unit should be stored in a clean dry place.
· Never store the unit with crystals in either the new or discard containers. Crystals absorb moisture from the air and can clog the machine. If this is inadvertently done, the machine must thoroughly be cleaned BEFORE it is turned on.
· Leave hand piece connected to the machine to help prevent humidity from entering the machine.
· Cover the hand piece end with a small plastic bag and place into the holder on the machine.
· Never drop, bump or stack anything on your machine. Do not place liquid filled containers on your machine.