Aluminum Extrusion Puller To lead and pulingl profiles to avoid twist or distortion

1100T Aluminum Extrusion Puller

Pulling force:150KG

 

1.The rail is made of 32 # I steel, both sides with 40 # square steel, steels through related treatment  in order to meet the necessary rigidity and reducing the profiles defects which caused by the vibration of puller ;

 

2.The puller is driven by DC motor, working through the chain which are set on the rail of the clamp device , electromagnetic brake control is adopt on the return;

 

3.The pullers head jaws clamp the sections and maintain certain degree of tension with the profiles, the pulling speed is synchronously with the extrusion press unit;

 

4.The electrical system is controlled by inverter, Mitsubishi PLC , through the encoder and PLC control the pulling speed and display the pulling length, it can position accuracy and high degree of automation;

 

5.The whole processing needed power is transmission slide wire, safety and reliable;

 

6.The puller has separate terminal control, all cables and wires are protected by line pipe and case.

Aluminum Extrusion Puller