Ads by Google
Main specification
| Data / Model | BYNG-A | BYNG-B | |
| Rated input voltage/Frequency | Three-phase 380V/50HZ | ||
| Rated input power (KW) | 25.18 | 33.18 | |
| Meet the workpiece diameter(mm) | 2000 | Φ1700-Φ10000 | |
| Gauge width(mm) | 2000 | 2500 | |
| Rail length(mm) | Determined by user requirements | ||
| Walking speed(mm/min) | 60-600 | 60-600 | |
| Polishing head rotational angle | ±180° | ±180° | |
| Shot put Weight (KG) | 500 | ||
| surface treatment level(Sa) | grade 2.5-3 (related with grit type) | ||
| Shot speed (the 3rd grade) | 60 (related to Grit type and work demand ) | ||
| Tire interaction with the workpiece transfer (with my product) | OK | ||
The product mainly has the following dvantages:
1.Low investment costs: As a result of partial vacuum sealing technology and work, promptly shot impact operations of large quantities of xides, rust, dust and other pumped vacuum cleaner, to make the work area without dust and noise, can produce workshop or directly supporting the use of the production line, which does not require construction blasting(sandblasting) rom and purchase of blasting (sand blasting) with all necessary facilities and equipment, therhby reducing the customer 50% of the investment cost.
2.Low energe consumption: This serise does not require high-power air compressor in the high energe consumption equipment, so it is with conventional surface treatment proces compared to 90% reduction in energy comsumption.
3.Reduce the labor costs and risks: As the only dust-free environment requires a person to operate the equipment, so save a lt of labor, reducing labor costs, and the workers never get pneumoconiosis, there is no employment risk.
4.High productivity: due to its Ke production plant or times the directly, workpiece safely omitted hoisting and transport processes, and its productivity is about eight tmes the manual, so save a lot of labor, Ji Da increase productivity.
5.Low cost of production: Open manual operation, a one-time to put Girl 20-30 tons, and the loss of large grit;and the equipment put in a one-time only 500kg of grit,you can recycle,do not throw sand, there is only wear and tear consumption, depending on the amount of wear can be properly added.
6.High quality surface treatment: arificial open-metal surface treatment, metal surface treatment bad depends on the personnel to operate the quality standards and accountability, the surface treatment of poor quality, uneven; while the device on the metal surface treatment is automated processing, without manual control, so even surface, good quality, fully able to meet three criteria.
7.High degree of automation: using digital control, high automation, easy operation and high reliablity