Ads by Google
u Introduction
1. Double head decoiler
Coil ID:500mm
Coil OD:1200mm (Max.)
Coil weight:1.5 T (Max.)
Decoiler speed:Adjust with feeder
Decoiler use synchronization stepless speed regulation with feeding, motor rotation.
2.Guide material buffer device
Use non-pit guide material buffer way, range measuring system, position switches etc.
3. Feeder machine
Make up of Up and down feeding roller and length measurement roller etc, feeder roller drive system adopt Taiwan DELTA drive motion control system. Center position, feeder can longitudinal whole translation; Servo motor drive, encoder length measurement, servo loop control;
Feed roller adopts polyurethane, normal use 0-180 m/min, highest feeding speed of 240M/min.
4. V punch part
Mainly includes V punch 1 set, servo motor driver.
V notch has horizontal step function, according to the program to automatic adjust.
Punch range: material center of ± 50 mm, stepping series can up to seven levels.
V shear use Taiwan DELTA servo motor drive, high efficiency, have low noise.
Cutter life: Each grinding can use at less 1 million times
5. Shearing part
Mainly make up of + 45 ° and - 45 ° shearing cutter.
Shear use Taiwan DELTA servo motor drive, high efficiency and low noise.
Cutter life: Each grinding can use at less 1 million times
6. Discharging platform
Unilateral positioning, transmission belt stepless speed regulation, discharging smoothly.
Discharging motor use Germany ABB motor, Toshiba inverter control.
7. Layered machine
Can complete the upper and lower discharging, mainly make by discharging device, transmission magnetic belt etc.
8. The electric positioning on unilateral width device
Whole line use unilateral positioning, operation mode adapted to different width transfer. The width organization adopts linear guide orientation, the ball screw transmission ways.
9. Pneumatic system
All pneumatic system use Taiwan AIRTAC pneumatic control system, the structure is compact, pipe is convenient to connect, bus connection.
10. Electric control system
The electric control system includes main electric control cabinet and work station.
Use Taiwan CNC motion control dedicated system,can realize multi-axis synchronization movement,realize complex shearing demand; Human interface design, easy to use,powerful,speed governing,positioning and function control are made up of Taiwan DELTA AC servo system, Taiwan DELTA logic control system, etc. Speed is above the normal movement 10 times, realize unprecedented high speed and high precision shear. Independent development of control program, and sheet shape shear program can be carry out all the tasks shear.
uMain technical parameters
1.Rang of work:
Thickness: 0.23-0.35mm
Width: 80-320/440mm
Length: 400-2500mm
2. Require for coil:
Width tolerance: ±0.1mm
Burr: ≤0.03mm
S deviation: Between 2000mm ≤0.2mm
3. Precision:
Length tolerance:±0.2mm
Angle tolerance: ±0.025°
Burr: ≤0.02mm
4. Feeding speed: 150m/min
5. Cutter life: More thanone million time (Each grinding), hard alloy material.
6. Total installed capacity: About 27Kw
7. Total gas consumption: 1M3/min
8. Working conditions:
(1)Temperature less than 40°C
(2) Voltage fluctuation: 380V±10%
(3)Frequency: 50Hz
9. Has longitudinal step function
10.Operation table direction: Right—Left, face to the equipment.
Cut to length line machine