1.With about 28 years' perfessional aluminum extruded sections manufacturing experience 2.National Exemption Product

Doors and windows product features:

1.Impact resistant, corrosion resistant, free from distortion and discoloring, smart and flexible; 

2,Optional and customizable colors for aluminum section materials, such as dull polishing, electrophoresis, and spray coating;

3.Simple, light, even, tender, smart and delicate.

100% use A00 aluminum ingot to make the production, and never use waste materials.

Over the past 20 years, our cmompany has beebn using A00 aluminum ingot, never use the waste materials, and ensure the product quality,extending the product life.

Advanced production equipment 

Three furnaces of 16 tons.

Ten extrusion production lines (660tons to 3600tons)

Three anodic oxidized coloring production lines.

Two electrophoretic coating section material production lines employing Japanese technology.

Two American color static powder spray coating production lines.

Two mechanical sandblast production lines.

Three heat insulting section material production lines.

Aluminum extrusion  

1.Has a strong resistance to abrasion, weathering and corrosion resistance .

2.a variety of colors to suit your requirements

3.Features:

1) Alloy:  6063, 6061, 6060, 6005, 6463, etc.

2) Temper: T4, T5, T6

3) Certificate: ISO9001:2000

4) Series of surface treatment:

   1. Mill Finish

   2. Anodizing  

   3. Powder Coating 

   4. Electrophoretic Coating 

   5. Wood Grain(wood imitation)  

   6. Thermal Break(heat insulation)

   7. Polish

5) Packing: Kraft paper, Pearl cotton foam, plastic film, or as the customer requires

6) Applications: windows, doors, curtain walls, cabinet, transportation, building, channel, railing, bracket, glasshouses, heat sinks, etc.

CHEMICAL COMPOSITION

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	other		Al
									Single	Total
6061	0.4-0.8	0.70	0.15-0.40	0.15	0.8-1.2	0.04-0.35	0.25	0.15	0.05	0.15	surplus
6063	0.2-0.6	0.35	0.10	0.10	0.45-0.9	0.10	0.10	0.10	0.05	0.15

 MECHANICAL PROPERTY

Alloy	Condition	Tensile strength	Yield strength	Elongation	Vickers hardness
6061	T6	>265Mpa	>245Mpa	>8%
6063	T5	>160Mpa	>110Mpa	>8%	HV>58     HW>8
	T6	>205Mpa	>180Mpa	>8%

Attention please!!!

1. Payment: 30% deposit, 70% before shipment by L/C or T/T, the mould charges should be paid in advance by T/T widely used in construction, decoration and industry.

2. Alu. ingot price : based on Nanhai lingtong aluminum price  

3. Minimum quantity: 1-3 tons

4. Surface treatment: Anodic oxidized / electrophoresis painted / powder coating / heat insulting / industrial /wooden grain / mill finished aluminum profiles. 

5. Color include: sand surface, slivery white, simulated stainless steel, cooper and campaign, or any other colors by the buyer’s requirement.