Clip holder:

On bottom left corner of the unit contains a magnet, any little iron substances such as paper clip (not included) can be absorbed on it.

How to take out the watch module?

Step 1: Turn the back cover along "OPEN" direction by a coin, so that the arrow icon aim at "OPEN" to open the back cover.

Step 2: Use as a screw driver (not included) aim at the notch to take out the module.

To Set Time:1) Pull out the crown,2) Turn the crown to set the current time.3) When the time is correct, push the crown back.

Display mode:1) The default mode is time display mode. Hour, minute and second are displayed with or without PMicon.2) Date display mode shows month and day.3) Press ' Mode' button to select time display mode and date display mode. Holding date display mode for 2 seconds, it will switch back to time display mode.

Setting time & date:

Press 'set' button to switch to setting mode. The setting sequence is second, hour, minute, month and day. During digit flashing, press 'mode' button to increase the value of digits. Holding 'mode' button for more than 2 seconds to fast set the values. Press 'set' button again to return back to time display mode.

CAUTION:This product is not suitable for children under 36 months due to small parts. This product is not a toy. Please retain these instructions