hydraulic aerial cage

The factors cause electric forklift corrosion

Factors cause electric forklift truck, electric stacker) corrosion of the main two factors is the use of environmental factors and their own structure factors. Battery electric forklift truck mostly used in warehouse and indoor places, environmental change is not big, relative environmental factors of the corrosion is light. And diesel truck relatively use environment is more severe, most used in port, wharf and industrial and mining sites, especially in the port and the chemical industry, the different climate environment and industrial waste gas, dust, causing the comprehensive function of forklift parts easy corrosion damage. In the anticorrosion pressure, electric forklift seems to pressure are much smaller.

Electric forklift truck, electric stacker) their own internal also can produce corrosion, such as the engine produces the high temperature and sulfur, chlorine ion of combustion gas combination, can make the battery produces acid fog, leakage condition; When the vibration and impact of stress, friction or collision is caused by the local failure etc, and it is also the main cause of electric forklift parts corrosion damage reason.

Another factor: metal corrosion. Metal corrosion main principle is: the original metal into metal oxide, cause structure or component rust, damage and even do not repair and lead to scrap. And paints, rubber, glass fiber reinforced plastic fiber etc. Nonmetal material aging, mainly is affected by the environmental impact, material polymer structure has cracking, degradation, dissolved, and other physical change and chemical change, leading to the appearance of aesthetic and performance degradation. External use environment, we can hardly change, so the electric forklift truck, electric stacker) itself structural design, material, technology and protective measures can decide the electric forklift corrosion resistant ability

Domestic electric forklift corrosion resistance and anticorrosive technology application form

At present domestic electric forklift truck, electric stacker) technology level, the protection design, aseptic technique are relatively low. Most of the domestic forklift paint layer gloss, flatness, fullness and adhesion is low; Coating and conversion coating quality is slow, especially heavy corrosion environment (such as acid mist, high temperature, etc.) the parts corrosion resistant ability is poor. Direct performance in the use of some time later, appear rust, and paint layer and therefore foaming, or peeling off, or discoloration and loss of light, and at the same time, fuel tank cleanness also can be reduced, non-metallic parts easy to deformation, etc.