Full stainless steel sealed construction; Submersible measurement; Constant current supply; Water-proof and oil-proof

Introduction

VIVO2011C level transducer is made by build-in a high accurate and reliable OEM gauge sensor into stainless steel housing. The top steel cap could protect sensor diaphragm and let liquid media go through unobstructed. The cable which has vented tube in connects with housing sealed, making sensor connecting to the atmosphere to make sure measurement precise. The transducer could be widely used for city water supply and drainage, water or oil tank, hydrology, reservoir, riverway and ocean, etc.

Specifications

Pressure range								0~1…500mH2O
Overpressure								1.5 times FS
Power supply								1.5mADC
Zero output								<±2mVDC
FS output								≥70mVDC or ≥25mVDC(range<2mH2O)
Accuracy								±0.1%FS(min.) ±0.25%FS(typ.) ±0.5%FS(max.)
Long-term stability								±0.3%FS/year
Compensation temp.								0°C~50°C
Operation temp.								-10°C~80°C
Storage temp.								-40°C~100°C
Zero temp. coefficient								≤±0.02%FS/°C
FS temp. coefficient								≤±0.02%FS/°C
Housing								Stainless steel 1Cr18Ni9Ti
Diaphragm								Stainless steel 316L
O-ring								Viton
Cable								Φ7.2mm PVC
Response time(10%~90%)								≤1ms
Insulation resistor								100MΩ,100VDC
Protection								IP68

  Outline Construction

Electric Connection

Cable color				Connection
Black				Iout
Red				+Vcc

Application Example

VIVO2011C Submersible Level Transducer