Clear and beautiful display achieved by the high-definition long-life CFL backlight(GT32M) FeaturesThe industry's smallest size in the 5-inch class, and 39.1-mm thin and cool body design (GT32M/GT32T)Large display with space-saving outer dimensions of 163.2 x 128.8 x 39.1 mm

SD memory card slot as standard equipment (16 GB max) (GT32M/GT32T)Easy to copy screen data. Also serves as storage for output sound files.USB interface as standard equipment (GT32M/GT32T)You can connect your PC and GT32 using your USB cable*2 to transfer screen data. Also supports the 'Through' function for our FP series PLC. Transformer-isolated power supply (GT32M/GT32T)The isolated power supply enhances the reliability.

GT32T equipped with 4096-color TFT display and GT32M equipped with high-brightness long-life backlightThe TFT color type and monochrome type are available in the same size. GT32T0/GT32T1 is ideal for use with upscale equipment models or color-coded operation instructions. GT32M is ideal for equipment that needs to be simple, such as in-house equipment.Sound output function (GT32T1)Audio information as well as visual and tactile information allows for more reliable control by operators.Ethernet connection (GT32T1)GT32T1 supports Ethernet connection, allowing for the 'through' function for our FP series PLC in a remote location.

GT32T1 supports Ethernet connection, which allows for program transfer to FP series and enables the monitor function. GT Memory Editor (attached to GTWIN) allows you to make alarm record data files and line graph data files, and edit internal memory.

Simple connection and maintenanceThe through function improves the convenience in combination with our FP series PLC.

GT data transfer and PLC debugging can be simultaneously executed by connecting your PC and GT with an Ethernet/USB cable.

Great diversity and variety of useThe 6-inch screen provides a wide variety of display functions that improve the workability for operators.

 TrueType fonts

With the TrueType fonts, the screen can display up to 768 characters at a time (32 chars. x 24 lines) and therefore be used effectively

 Analog-touch design

You can freely position switches as small as 8 x 8 dots

 Graph function

You can identify the production or operation status in line or bar graph form.

 Recipe function

Settings by product item and other data (up to 3,600 words) can be transferred to PLC, simplifying PLC programming

 Recipe function

A flowing message of up to 64 characters (two-byte) can be displayed at the bottom of the screen. (128 messages)

 Alarm list

 Alarm activation, check, and recovery can be recorded and displayed.

 Write Device function

This function writes the PLC values or turns bits on/off according to the PLC status or the screen No.

The language switching function facilitates PLC programming and screen switching.

Conventionally, screens were created for each language. With this new language switching function, data can be entered in all available languages for each part. The same screens can be created all at once, and ladder diagram creation is also easier. The character table (below picture) for switching the language display can be edited in Excel and imported.

Available languages

There are two types of communication [RS232C/RS422 (RS485)]. Connection with PLCs of a variety of manufacturers is possible.

(Please refer to the compatible PLC list.)

The RS422 type can be connected at a maximum distance of 500m.

*1*2

Compared with GT30.

Please use a commercially available AB type USB cable.

GTWIN Ver. 2.8 or later is required to use GT32. The GT32M cannot display gradations. The panel face protection sheet for GT32 is available as an option. To use the internal clock function, buy the dedicated battery (AFPX-BATT).

Panasonice HMI AIG32TQ05D