Freeze dryer for sale 1.For air dryer 2.Adopt advanced copeland compressor 3.Water cooled freeze dryer

The freeze dryer produced by our company adopts the internationally famous compressor, refrigeration fittings and control components, and it enjoys the features of excellent capability, reliable operation, low noise, high efficiency and energy saving. The structure is compact with the beautiful appearance, and installation convenient.

Introduction of Advantages

Generally we have air -cooled , water cooled, high-temperature air cooled, high temperature water cooled different style, it can be widely used by your selection.

1.High efficient air to air heat exchanger. When the temperature of compressed air rised,  it will reduce the related humidity  of compressed air(usually less than 20%) , it will benefit to the metal corrision.

2.High efficient evaporator. The aluminum foil wing connected to the copper pipe to expand the heat transferring area in airside.

(it is similar to air conditioning that used at home). Thus ensure the high efficient heat transferring.

3.High efficient water seperator. The good performance can avoid the water evaporatation again, it is important to guarantee the dry effect of freeze dryer. 

4.Adopt the high automatic drainage. It can excrete  the condensate water timelt and completely. We usually adopt the float type and electromagnetic automatic drainage. It ensures the normally function of freeze dryer.

5.Both the evaporator and condenser adopt the strengthened heat transmitting technique, which is high-efficiency and energy saving.

6.The main components all adopt the imported high-quality products with the excellent capability.

 

7.It adopts the programmable controller and the display with back light. The fully automatic control of the constant temperature and humidity of the unit depend on the operation failure protection.

 

8.The components are few and there are no components easy to damage. operation reliable and long life.

 

9.It has water-cooled and air-cooled freeze dryer.

 

More details: 

 

 

Water-cooling Type	Air-cooling type
inlet temperature:	inlet temperature:
Normal-temp type≤45°C	Normal-temp type≤45°C
High-temp type≤80°C	High-temp type≤80°C
Cooling water inlet temp≤32°C	Ambient temp≤50°C
Pressure Dew Point: 2-10°C	Pressure Dew Point: 2-10°C
Inlet pressure	Inlet pressure
0.6~1.0MPa	0.6~1.0MPa
Pressure loss	Pressure loss
working pressure 5%	working pressure 5%

 The installation precaution of freeze dryer: 1.We usually install the pre-filter to ensure the heat transferring effect. 2. By-pass valve should be installed in the system if the gas need to be without interruption. 3. The filter installation will be equipped according to customer's needs.