Ads by Google
T10 LED tube light(APL-T10-3103)
T10 SMD LED Tube light:
Tube Light Description:
LED tubes replace conventional mercury lamps that are usually used in grid lights and troffer type fixtures. These tubes have reliable power supply that excludes light flickering and any annoying noise. Also these lights do not irradiate light in UV spectrum and do not attract insects.LED tubes have high colour rendering index that is important not only for offices and supermarkets, but also for everyday usage.
1. 300~2400mm 2. CE/RoHS 3. 2 years warranty 4. High efficieny SMD3528 LEDs,
Detailed Spcification:
Input voltage: | AC85-265V/50~60Hz |
LED Power: | 8/15/18/22/28/35W |
LED Tube Size: | Dia: 30mm, Length:600/900/1200/1500/1800/2400mm |
LED Light source: | SMD3528 |
Color temperature: | 2800-3200K, 3800-4500K, 5500-6500K |
LED Beam Angle: | 120 degree |
Base Type: | G13 |
Polarity: | Bipolar Protection |
Efficiency: | 90% |
Operating Temperature: | -20~+45 Degrees Celsius |
Storage Temperature: | -30~+65 Degrees Celsius |
Material: | Aluminum +PC cover(clear/frosted) |
LED Lifespan: | 50,000hrs |
Advantages of our LED Tubes:
1. Imported famous LED chip-Epistar, Bridgelux, Cree etc.
2. Integrated heat sink design, with PCB board on heat sink Aluminum, greatly improving heat dissipation.
3. Light decay is less than 3% by 3000hrs aging test under temperature of 50 degree.
4. Good control of the quality.
5. CE/RoHS approved. Warranty time: 2 years
Installation instruction:
1. Cut off the power supply before installation;
2. No starter, NO ballast, or electronic switch is required;
3. Install lamp stand and T10 lamp holder first with the same length;
4. Lamp working voltage is AC85-265V.
5. Connect the two wire terminals located at the side of the lamp to the electricity L and N respectively;
6. Do not supply the power to both pins on the same end simultaneously
Applications:Commercial and residential lighting: ideal for office, conference, rooms, supermarket, restaurant, school, library, hospital, living room, etc