Ovulation Tests            

One Step  LH Urine Ovulation Test

The One-Step LH Ovulation Tests are qualitative immunoassays for detecting elevated levels of

Luteinizing Hormone (LH) in urine.The test is fast and easy to use. It is a qualitative test that can

predict when there is a LH (luteinizing hormone) surge, and in turn, when you are likely to ovulate.

The One-Step LH Ovulation Tests measure LH with high sensitivity and are therefore ideally suited

for Family Planning and Gynae Clinics

TEST PROCEDURE—Midstream Format

1. Allow the sealed LH Midstream test pouch, urine sample, and control solution to reach

room temperature (18-30°C).

2. Remove the LH Midstream device from the sealed pouch.

3. Hold the round end of cover with one hand. Use the other hand to pull out the test

device and expose the absorbent.

4. Point the absorbent tip downward, place the absorbent tip in the urine stream for at least 5 seconds to be thoroughly wet. Alternately, you can collect

   your urine into a clean cup and dip half of the absorbent pad into the urine for at least 5 seconds.   Do not stream pass the arrow end

5. Re-cap the device and wait for colored bands to appear. Depending on the concentration of LH, positive result may be observed in as little as 40

seconds. However, to confirm negative results, the complete reaction time of 10 minutes is required. Do not read results after more than 30 minutes.

LH Ovulation test 6.0mm midstream