EPONA SATA II 2.5” SSD | ITEM NO: EPSSD--2000 |
| |||
General |
Form factor | 2.5" |
| ||
interface | SATA II |
| |||
Performance | Capacity(GB) | 32GB | 64GB | 128GB | |
Sustained Read | 170MB/S | 170MB/S | 170MB/S | ||
Sustained Write | 55MB/S | 55MB/S | 55MB/S | ||
Random IOPS | 6,100 | ||||
Average Access time | 0.2ms | ||||
Storage Media | NAND Flash | MLC- NAND Flash | |||
Power
Consumption | input Voltage | 5V+/_5% | |||
Idle | 0.5W | ||||
Active | 2.0W | ||||
Reliability& Endurance | Write endurance | 10years@10GBytes write and erase per day at 128GB | |||
Read endurance | unlimited | ||||
Wear-Leveling Algorithm | Dynamic and static wear-leveling | ||||
Data Retention | 10years at 25°C | ||||
MTBF | 1,000,000hours | ||||
ECC | Supports BCH ECC 8bits or 15bits in 512 bytes | ||||
Bad Block Management | Auto Bad Block Management in system | ||||
Environment | Operating Temperature | 0~70°C | |||
Non-operating Temperature | -40~85°C | ||||
Shock | 2,000G(@0.3ms half sine wave) | ||||
Vibration | 20G(40-2000HZ) | ||||
Humidity | 5-95% | ||||
Available unit | NO EOL | ||||
Testing
Software |
HDBench3.4.0.3, IOMeter 2007.12.11 | ||||
Physical
Dimensions
& Weight | Height(mm) | 9.5+/_0.25 | |||
Width(mm) | 69.8+/_0.25 | ||||
Length(mm) | 100.2+/_0.25 | ||||
Weight(g) | 66-69 |
EPONA SATA II 2.5” SSD 32/64/128GB
Form factor: 2.5"
Interface: SATA II
Capacity(GB): 32/64/128GB
Sustained Read: 170MB/S
Sustained Write: 50MB/S
Random IOPS: 6100
Average Access time: 0.2ms
SATAII 2.5" SSD 32/64/128GB