hot sales MR16 led COB 1) Low-carbon 2)Energy saving 80% 3)Warranty:3 years 4) CSA,CE,C-TICK

                                                   Dimmable  hot sales MR16 LED COB

                                                                              Model No.: DA-MR16-COB-5W

Dimmable  hot sales MR16 led COB details:

Model	DA-MR16-COB-5W
Input Voltage	DC12V
Watt	5W
LED Qty	1pcs
Lumen	500lm
CCT	3300K/4500K/6500K
Colors	WW/PW/CW
CRI	>85ra
Working Temp	-40° to +60°
Working Frequency	50~60HZ
Beam angle	60 degree
Base type	GU10, E27, E14,MR16
Size	D50*H85mm
Lifespan	50 000hours
Warranty	3years
Certificate	CE& RoHS SAA CSA C-tick

Features & Benefits:

1. High brightness high power LED light source to achieve the illumination purpose;

2. High shock and vibration resistant with aluminum body;

3. Low power consumption, save energy and maintenance cost;

4. Low heat generation, no heat damage to achieve ideal display lighting;

5. Good thermal property with special designed aluminum alloy housing;

6. Special circuit design, each LED can work separately  thus it can avoid  the influence that  a broken LED causes;

7. No worry about starting up problem due to the low transformer voltage. Our spotlights match all of the transformers at the market.

8. Use high thermal conductivity aluminium, good heat dissipation;

9. Easy installation with existing socket;

10. Green Product, and No strobe, no radiation, friendly to eyes and body;

hot sales led COB  :  

Application of  hot sales  MR16 led COB  :

1. Widely used in hotel, hall, chamber, villa and other slap-up locations to illuminate and decorate.2. Store revelation, supermarketshowcase,restaurant and other indoor decorations and lighting; revelation hall, art hall, museum,office, reading room and local lighting;groggery,karaoke and other entertainment places atmosphere lighting ; Jewelry, gold and silver jewelry and fashion lighting.3. Directly replace the traditional led light. 

Directions For Use

1.Mounting Procedures:1.1 Disconnect the power supply before installation, to ensure safety1.2 Insert bulb into the lamp holder, rotate the bulb clockwise until bulb cap touch the bottom of the lamp holder.   2.Environment Requests2.1 Operating temperature:-20°C~+50°C2.2 Storage temperature:-25°C~+60°C2.3 Operating humidity:30%~85%2.4 Storage humidity:10%~90%2.5 Storage environment: Indoor, ventilation and there should not have any corrosive gases. Caution: To reduce the risk of fire, electric shock, or injury to persons:1.Never touch the lamps with bare hands to avoid a thermal burn when they are used.2.Use in dry location only, never use where water may drop on the lamp. This is extremely dangerous because it may cause an electric leak.3.No internal parts are available to be repaired in the lamp. Serious accidents may occur if a repaired lamp is installed.4.To avoid injury to persons or damage to the lamp, make sure that the lamp is firmly installed into the lamp holder. 5.Never use in front of or over a room heater. Do not switch on and off frequently. Switching on and off may shorten the lamp service life.6.To avoid eye injury, do not look directly at strong light source.

Shipping Options:1.By express: Such as DHL,UPS, TNT, FEDEX ect. The dispatch time is about 3-7 working days;

2.Air Freight: When you order more than 100kg which will be more economical than express;3. Agent designated by client: Please tell us the contact details of your shipping agent/forwarder;

Company profile:

DANS OPTO-ELECTRONIC TECHNOLOGY CO., LIMITED is engaged in the scientific research,

manufacture, technical support and service of LED semiconductor illumination products. Operating instrict accordance with the ISO9001 quality management system, DANS is equipped with advanced

experimentation equipment and fully automatic productionlines, and has an annual output capacity of 1,000,000 pieces of LED lights.