Glass bending machine Flat and bent glass tempering Beckhoff intelligent control Low power consumption Low breaking rate

Glass bending machine

Advantage:

High product quality

Opposite roll pressing, mechanical position location and accurate forming which is smooth without press mark.

Easy operation

Glass curvation is automaticlly controlled by computer without any mould.

Low Engergy consumption

The energy consumption of this machine is very low with good thermal insulation and reasonable energy saving.

The glass bending tempering machine can process tempered glass and bending & tempering glass on the same machine. With human friend interface Beckhoff controller, all processing data can be input and set on computer which greatly facilitate production. We have many types of glass bending/tempering machine for different size of glass and output. Below information is for our glass type YD-FB-2436:

Machine dimension:

Technical date YD-FBZ-2436
Parameters (Flat glass)	Max.Glass size	2400x3600mm (5-19mm)
	Min.Glass size	100x280mm
	Glass thickness	5-19mm
	Output (5mm glass)	15 lots/hour
Parameters (Bent glass)	Max.Glass size	2400x3000mm
	Min.Glass size	450x450mm
	Glass thickness	5-19mm
	Min radius	1000mm
	Output (5mm glass)	15 lots/hour
Power	Heating	680KW
	Fan	75KW+75KW
	Others	12KW
	Total	842KW
Other parameter	Machine dimension	22x2.8x2.8m (not including fan, air collection room)
	finished products rate	95%
	energy consumption	≤4KW/hour/square meter
	Quality standard	GB 9963

 

Machine main components:

The tempering furnace is consisted by loading table, heating furnace, tempering cooling device ,unloading table, wind motor, wind blowing system ,electric control cabinet and computer control terminals. For bending and tempering furnace, an additional bending and cooling cabinet is assembled for glass bending.